www.p-tec.net
[email protected]
Tel: Fax:
(719) 589 3122 (719) 589 3592
PL505/506 SERIES RIGHT ANGLE 5MM LED HOLDER
Features
*housing material black * PL25 is used for a Nylon 5.0mm protrusion * low current (PL505) requirements * PL15 is used for a *uses PL25 or PL15 3.9mm protrusion (5mm) LED series (PL506) available with 5V and *both available in dual, 12V integrated current triple, quad and quint limiting resistor , LED versions low current and bi-color
Absolute Maximum Ratings at TA = 25 °C
Reverse Voltage (<100 mA) ……...…...…….…... 5.0V(4.0V for Super red) Max Forward Current …………..………………….……..………. 20mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) ……........…....100mA Operating Temperature Range ………………………….. 25°C to + 85°C Storage Temperature Range ……………….....……….- 25°C to +100°C Soldering Temperature 4mm below body……………...….…260° for 5 seconds
Electrical & Optical Characteristics at TA = 25 °C
Part number Emitting Color 3.3mm PL506-1R PL506-1H PL506-1G PL506-1Y PL506-1A PL506-1O PL506-1S Bright red Hi-eff. red Green Yellow Amber Orange Super red Peak Wave length (nm) View Angle 2θ ½ degrees Forward Voltage @20mA (V) typ 2.1 2.1 2.1 2.1 2.1 2.1 1.7 max 3.0 3.0 3.0 3.0 3.0 3.0 2.2 min 2.5 14.4 12.4 10.3 14.4 14.4 98.0 Luminous Intensity @20mA (mcd) PL501 typ 4.1 24.0 20.7 17.1 24.0 24.0 163 PL502 min 2.5 14.0 12.0 9.9 14.0 14.0 94.5 typ 4.1 23.2 20.0 16.4 23.2 23.2 156
4.4mm PL505-1R PL505-1H PL505-1G PL505-1Y PL505-1A PL505-1O PL505-1S
700 635 PL505 567...
