Dual Operational Transconductance Amplifier
NE5517
The NE5517 contains two current-controlled transconductance amplifier...
Dual Operational Transconductance Amplifier
NE5517
The NE5517 contains two current-controlled transconductance amplifiers, each with a differential input and push-pull output. The NE5517 offers significant design and performance advantages over similar devices for all types of programmable gain applications. Circuit performance is enhanced through the use of linearizing diodes at the inputs which enable a 10 dB signal-to-noise improvement referenced to 0.5% THD. The NE5517 is suited for a wide variety of industrial and consumer applications.
Constant impedance of the buffers on the chip allow general use of the NE5517. These buffers are made of Darlington
transistors and a biasing network that virtually eliminate the change of offset voltage due to a burst in the bias current IABC, hence eliminating the audible noise that could otherwise be heard in high quality audio applications.
Features
Constant Impedance Buffers DVBE of Buffer is Constant with Amplifier IBIAS Change Excellent Matching Between Amplifiers Linearizing Diodes High Output Signal-to-Noise Ratio This is a Pb−Free Device
Applications
Multiplexers Timers Electronic Music Synthesizers Dolby® HX Systems Current-Controlled Amplifiers, Filters Current-Controlled Oscillators, Impedances
DATA SHEET www.onsemi.com
1
SOIC−16 D SUFFIX CASE 751B
MARKING DIAGRAM
xx5517DG AWLYWW
1
xx = NE A = Assembly Location WL = Wafer Lot YY, Y = Year WW = Work Week G = Pb−Free Package
PIN CONNECTIONS
IABCa 1...