Document
NSBA114EDXV6T1, NSBA114EDXV6T5 SERIES
Preferred Devices
Dual Bias Resistor Transistors
PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network
The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base−emitter resistor. These digital transistors are designed to replace a single device and its external resistor bias network. The BRT eliminates these individual components by integrating them into a single device. In the NSBA114EDXV6T1 series, two BRT devices are housed in the SOT−563 package which is ideal for low−power surface mount applications where board space is at a premium.
Features
(3) R1 Q1 Q2 R2 (4) R1 (5) (6)
http://onsemi.com
(2) R2 (1)
• • • •
Simplifies Circuit Design Reduces Board Space Reduces Component Count These are Pb−Free Devices
www.DataSheet4U.com
1
SOT−563 CASE 463A PLASTIC STYLE 1
MARKING DIAGRAM
MAXIMUM RATINGS
(TA = 25°C unless otherwise noted, common for Q1 and Q2) Rating Collector-Base Voltage Collector-Emitter Voltage Collector Current Symbol VCBO VCEO IC Value −50 −50 −100 Unit Vdc Vdc mAdc
xx M G G
THERMAL CHARACTERISTICS
Characteristic (One Junction Heated) Total Device Dissipation @ TA = 25°C Derate above 25°C (Note 1) Thermal Resistance, Junction-to-Ambient (Note 1) Characteristic (Both Junctions Heated) Total Device Dissipation @ TA = 25°C Derate above 25°C (Note 1) Thermal Resistance, Junction-to-Ambient (Note 1) Junction and Storage Temperature Range Symbol PD RqJA Max 357 2.9 350 Unit mW mW/°C °C/W
xx = Device Code (Refer to page 2) M = Date Code G = Pb−Free Package (Note: Microdot may be in either location)
ORDERING INFORMATION
Device NSBA1xxxDXV6T1 Package Shipping †
SOT−563* 4000/Tape & Reel
NSBA1xxxDXV6T1G SOT−563* 4000/Tape & Reel Symbol PD RqJA TJ, Tstg Max 500 4.0 250 −55 to +150 Unit mW mW/°C °C/W °C NSBA1xxxDXV6T5 SOT−563* 8000/Tape & Reel
NSBA1xxxDXV6T5G SOT−563* 8000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. **This package is inherently Pb−Free.
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR−4 @ Minimum Pad
DEVICE MARKING INFORMATION
See specific marking information in the device marking table on page 2 of this data sheet. Preferred devices are recommended choices for future use and best overall value.
© Semiconductor Components Industries, LLC, 2006
1
April, 2006 − Rev. 6
Publication Order Number: NSBA114EDXV6/D
NSBA114EDXV6T1, NSBA114EDXV6T5 SERIES
DEVICE MARKING AND RESISTOR VALUES
Device* NSBA114EDXV6T1 / T5 NSBA124EDXV6T1 / T5 NSBA144EDXV6T1 / T5 NSBA114YDXV6T1 / T5 NSBA114TDXV6T1 / T5 NSBA143TDXV6T1 / T5 NSBA113EDXV6T1 / T5 NSBA123EDXV6T1 / T5 NSBA143EDXV6T1 / T5 NSBA143ZDXV6T1 / T5 NSBA124XDXV6T1 / T5 NSBA123JDXV6T1 / T5 NSBA115EDXV6T1 / T5 NSBA144WDXV6T1 (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) (Note 2) Package SOT−563 SOT−563 SOT−563 SOT−563 SOT−563 SOT−563 SOT−563 SOT−563 SOT−563 SOT−563 SOT−563 SOT−563 SOT−563 SOT−563 Marking 0A 0B 0C 0D 0E 0F 0G 0H 0J 0K 0L 0M 0N 0P R1 (kW) 10 22 47 10 10 4.7 1.0 2.2 4.7 4.7 22 2.2 100 47 R2 (kW) 10 22 47 47 ∞ ∞ 1.0 2.2 4.7 47 47 47 100 22
*The “G’’ suffix indicates Pb−Free package available. Refer to Ordering Information Table on page 1. 2. New resistor combinations. Updated curves to follow in subsequent data sheets.
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, common for Q1 and Q2)
Characteristic OFF CHARACTERISTICS Collector-Base Cutoff Current (VCB = −50 V, IE = 0) Collector-Emitter Cutoff Current (VCE = −50 V, IB = 0) Emitter-Base Cutoff Current (VEB = −6.0 V, IC = 0) NSBA114EDXV6T1 NSBA124EDXV6T1 NSBA144EDXV6T1 NSBA114YDXV6T1 NSBA114TDXV6T1 NSBA143TDXV6T1 NSBA113EDXV6T1 NSBA123EDXV6T1 NSBA143EDXV6T1 NSBA143ZDXV6T1 NSBA124XDXV6T1 NSBA123JDXV6T1 NSBA115EDXV6T1 NSBA144WDXV6T1 ICBO ICEO IEBO − − − − − − − − − − − − − − − − −50 −50 − − − − − − − − − − − − − − − − − − −100 −500 −0.5 −0.2 −0.1 −0.2 −0.9 −1.9 −4.3 −2.3 −1.5 −0.18 −0.13 −0.2 −0.05 −0.13 − − nAdc nAdc mAdc Symbol Min Typ Max Unit
Collector-Base Breakdown Voltage (IC = −10 mA, IE = 0) Collector-Emitter Breakdown Voltage (Note 3) (IC = −2.0 mA, IB = 0) ON CHARACTERISTICS (Note 3) Collector-Emitter Saturation Voltage (IC = −10 mA, IE = −0.3 mA) (IC = −10 mA, IB = −5 mA) NSBA113EDXV6T1/NSBA123EDXV6T1 (IC = −10 mA, IB = −1 mA) NSBA114TDXV6T1/NSBA143TDXV6T1 NSBA143EDXV6T1/NSBA143ZDXV6T1/NSBA124XDXV6T1 3. Pulse Test: Pulse Width < 300 ms, Duty Cycle < 2.0%
V(BR)CBO V(BR)CEO
Vdc Vdc
VCE(sat)
−
−
−0.25
Vdc
http://onsemi.com
2
NSBA114EDXV6T1, NSBA114EDXV6T5 SERIES
ELECTRICAL CH.