Document
SMF05C, SMF12C, SMF15C, SMF24C 5−Line Transient Voltage Suppressor Array
This 5−line voltage transient suppressor array is designed for application requiring transient voltage protection capability. It is intended for use in over−transient voltage and ESD sensitive equipment such as computers, printers, automotive electronics, networking communication and other applications. This device features a monolithic common anode design which protects five independent lines in a single SC−88 package.
Features http://onsemi.com
SC−88 FIVE TRANSIENT VOLTAGE SUPPRESSOR 100 W PEAK POWER
MARKING DIAGRAM
6 SC−88 CASE 419B STYLE 24 1 XX MG G
• Protects up to 5−Line in a Single SC−88 Package • Peak Power Dissipation − 100 W (8 x 20 ms Waveform) • ESD Rating of Class 3B (Exceeding 8 kV) per Human Body Model • • • • • • • •
and Class C (Exceeding 400 V) per Machine Model. Compliance with IEC 61000−4−2 (ESD) 15 kV (Air), 8 kV (Contact) Flammability Rating of UL 94 V−0 Pb−Free Packages are Available Hand−Held Portable Applications Networking and Telecom Automotive Electronics Serial and Parallel Ports Notebooks, Desktops, Servers
1
Applications
www.DataSheet4U.com
XX =
M G
Specific Device Code 6J = SMF05C 6K = SMF12C 6L = SMF15C 6M = SMF24C = Date Code = Pb−Free Package
MAXIMUM RATINGS (TJ=25°C unless otherwise specified)
Symbol PPK 1 Rating Peak Power Dissipation 8 x 20 ms Double Exponential Waveform (Note 1) Operating Junction Temperature Range Storage Temperature Range Lead Solder Temperature (10 s) Human Body Model (HBM) Machine Model (MM) IEC 61000−4−2 Air (ESD) IEC 61000−4−2 Contact (ESD) Value 100 Unit W 1 2 −40 to 125 −55 to 150 260 16000 400 15000 15000 °C °C °C V 3
PIN ASSIGNMENT
6 5 4 PIN 1. CATHODE 2. ANODE 3 CATHODE 4. CATHODE 5. CATHODE 6. CATHODE
TJ TSTG TL ESD
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet.
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. Nonrepetitive current pulse per Figure 3.
© Semiconductor Components Industries, LLC, 2005
August, 2005 − Rev. 2
1
Publication Order Number: SMF05C/D
SMF05C, SMF12C, SMF15C, SMF24C
SMF05C ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter Reverse Working Voltage Breakdown Voltage Reverse Leakage Current Clamping Voltage Clamping Voltage Maximum Peak Pulse Current Capacitance Symbol VRWM VBR IR VC VC IPP CJ (Note 2) IT = 1 mA, (Note 3) VRWM = 5 V IPP = 5 A (8 x 20 ms Waveform) IPP = 8 A (8 x 20 ms Waveform) 8 x 20 ms Waveform VR = 0 V, f = 1 MHz (Line to GND) 80 6.2 0.07 Conditions Min Typ Max 5.0 7.2 5.0 9.8 12.5 8.0 130 Unit V V mA V V A pF
SMF12C ELECTRICAL CHARACTERISTICS (TJ = 25°C unle.