Analog Multiplexer/Demultiplexer
NLAS4052 Analog Multiplexer/ Demultiplexer
Double–Pole, 4–Position Plus Common Off
The NLAS4052 is an improved version o...
Description
NLAS4052 Analog Multiplexer/ Demultiplexer
Double–Pole, 4–Position Plus Common Off
The NLAS4052 is an improved version of the MC14052 and MC74HC4052 fabricated in sub–micron Silicon Gate CMOS technology for lower RDS(on) resistance and improved linearity with low current. This device may be operated either with a single supply or dual supply up to ±3 V to pass a 6 VPP signal without coupling capacitors. When operating in single supply mode, it is only necessary to tie VEE, pin 7 to ground. For dual supply operation, VEE is tied to a negative voltage, not to exceed maximum ratings.
http://onsemi.com MARKING DIAGRAMS
16 9
SO–16 D SUFFIX CASE 751B
NLAS4052 AWLYWW
1 8
Improved RDS(on) Specifications Pin for Pin Replacement for MAX4052 and MAX4052A
– One Half the Resistance Operating at 5.0 Volts Single or Dual Supply Operation – Single 2.5–5 Volt Operation, or Dual ±3 Volt Operation – With VCC of 3.0 to 3.3 V, Device Can Interface with 1.8 V Logic, – No Translators Needed – Address and Inhibit pins are Logic is Over–Voltage Tolerant and – www.DataSheet4U.com – May Be Driven Up +6 V Regardless of VCC Address and Inhibit pins are Standard TTL Compatible – Greatly Improved Noise Margin Over MAX4052 and MAX4052A Improved Linearity Over Standard HC4052 Devices Packages
TSSOP–16 DT SUFFIX CASE 948F
16
9
NLAS 4052 ALYW
1 8
16
9
Popular SOIC, and Space Saving TSSOP, and QSOP 16 Pin
QSOP–16 QS SUFFIX CASE 492 A WL, L Y WW, W
NLAS 4052 ALYW
1 8
= Assembly Location ...
Similar Datasheet