LT1213

U U LT1213/LT1214 28MHz, 12V/µs, Single Supply Dual and Quad Precision Op Amps FEATURES s Slew Rate: 12V/µs Typ s Gain-Bandwidth Product: 28MHz Typ s Fast Settling to 0.01% 2V Step to 200µV: 500ns Typ 10V Step to 1mV: 1.1µs Typ s Excellent DC Precision in All Packages Input Offset Voltage: 275µV Max Input Offset Voltage Drift: 6µV/°C Max Input Offset Current: 40nA Max Input Bias Current: 200nA Max Open-Loop Gain: 1200V/mV Min s Single Supply Operation Input Voltage Range Includes Ground Output Swings to Ground While Sinking Current s Low Input Noise Voltage: 10nV/√Hz Typ s Low Input Noise Current: 0.2pA/√Hz Typ s Specified at 3.3V, 5V and ±15V s Large Output Drive Current: 30mA Min s Low Supply Current per Amplifier: 3.5mA Max s Dual in 8-Pin DIP and SO-8 s Quad in 14-Pin DIP and NARROW SO-16 Note: For applications requiring higher slew rate, see the LT1215/LT1216 data sheet. For lower power and lower slew rate, see the LT1211/LT1212 data sheet. DESCRIPTIO The LT®1213 is a dual, single supply precision op amp with a 28MHz gain-bandwidth product and a 12V/µs slew rate. The LT1214 is a quad version of the same amplifier. The DC precision of the LT1213/LT1214 eliminates trims in most systems while providing high frequency performance not usually found in single supply amplifiers. The LT1213/LT1214 will operate on any supply greater than 2.5V and less than 36V total. These amplifiers are specified at single 3.3V, single 5V and ±15V supplies, and only require 2.7mA of quiescent...