T6829

Features Supply Voltage up to 40 V RDSon Typically 0.5 Ω at 25°C, Maximum 1 Ω at 150°C Up to 1.5 A Output Current Three High-side and Three Low-side Drivers Usable as Single Outputs or Half Bridges Capable to Switch all Kinds of Loads such as DC Motors, Bulbs, Resistors, Capacitors and Inductors PWM Capability for Each Output Controlled by External PWM Signal No Shoot-through Current Very Low Quiescent Current IS < 5 µA in Standby Mode over Total Temperature Range Outputs Short-circuit Protected Selective Overtemperature Protection for Each Switch and Overtemperature Prewarning Undervoltage Protection Various Diagnostic Functions such as Shorted Output, Open Load, Overtemperature and Power-supply Fail Detection Serial Data Interface, Daisy Chain Capable, up to 2 MHz Clock Frequency SO16 Power Package Dual Triple DMOS Output Driver with Serial Input Control T6819/T6829 Preliminary Description The T6819/T6829 are fully protected driver interfaces designed in 0.8 µm BCDMOS technology. They are used to control up to six different loads by a microcontroller in automotive and industrial applications. Each of the three high-side and three low-side drivers is capable to drive currents up to 1.5 A. Each driver is freely configurable and can be controlled separately from a standard serial data interface. Therefore, all kinds of loads such as bulbs, resistors, www.DataSheet4U.com capacitors and inductors can be combined. The IC design especially supports th...