T6828

Features Supply Voltage up to 40 V RDSon Typically 0.5 Ω at 25°C, Maximum 1.1 Ω at 150°C Up to 1.5 A Output Current Three Half-bridge Outputs Formed by Three High-side and Three Low-side Drivers Capable to Switch all Kinds of Loads Such as DC Motors, Bulbs, Resistors, Capacitors and Inductors No Shoot-through Current Very Low Quiescent Current IS < 5 µA in Standby Mode versus Total Temperature Range Outputs Short-circuit Protected Overtemperature Protection for Each Switch and Overtemperature Prewarning Undervoltage Protection Various Diagnostic Functions Such as Shorted Output, Open-load, Overtemperature and Power-supply Fail Detection Serial Data Interface, Daisy Chain Capable, up to 2 MHz Clock Frequency SO14 Power Package Description The T6818/T6828 are fully protected driver interfaces designed in 0.8-µm BCDMOS technology. They are used to control up to 3 different loads by a microcontroller in automotive and industrial applications. Each of the 3 high-side and 3 low-side drivers is capable to drive currents up to 1.5 A. The drivers are internally connected to form 3 half-bridges and can be controlled separately from a standard serial data interface. Therefore, all kinds of loads such as bulbs, resistors, capacitors and inductors can be combined. The IC design especially supports the application of H-bridges to drive DC motors. www.DataSheet4U.com Protection is guaranteed regarding short-circuit conditions, overtemperature and under voltage. Va...