High Power GaAs SPDT Switch
High Power GaAs SPDT Switch DC - 3 GHz
Features
q
SW-106, SW-276
V 2.00
SW-106 (CR-5)
q q q q
+39 dBm Typ. 1 dB Comp...
Description
High Power GaAs SPDT Switch DC - 3 GHz
Features
q
SW-106, SW-276
V 2.00
SW-106 (CR-5)
q q q q
+39 dBm Typ. 1 dB Compression Point, -8V Control +65 dBm Typ. 3rd Order Intercept, -8V Control Insertion Loss of 0.4 dB Typical Low Power Consumption Fast Switching Speed
DC - 3.0 GHz DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 3.0 GHz DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 3.0 GHz DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz DC - 3.0 GHz (–55°C to +85°C) SW-106 SW-276 0.5 dB 0.6 dB 0.8 dB 1.2 dB 34 dB 32 dB 20 dB 15 dB 1.3:1 1.5:1 1.5:1 1.6:1 0.4 dB Max 0.5 dB Max 0.7 dB Max 1.0 dB Max 37 dB Min 31 dB Min 24 dB Min 19 dB Min 1.3:1 Max 1.5:1 Max 1.5:1 Max www.DataSheet4U.com 1.6:1 Max
Guaranteed Specifications1
Frequency Range Insertion Loss
Isolation
VSWR
Operating Characteristics2
Impedance Switching Characteristics Trise, Tfall (10% to 90% ) Ton, Toff (50% CTL to 90%/10% RF) Transients (In-Band) Input Power for Compression 0.9 GHz (-5VControl) 0.9 GHz (-8V Control) 0.1 dB +32.5 dBm +35.5 dBm 50 Ohms Nominal 30 ns Typ 35 ns Typ 12 mV Typ 1.0 dB +35.5 dBm +39.5 dBm Typ Typ
SW-276 (CR-2)
Third Order Intercept Point (with two +10 dBm Input Tones) 0.9 GHz (-5V Control) +61 dBm Typ 0.9 GHz (-8V Control) +65 dBm Typ Control Voltages Vin Low Vin High 0 to -0.2V @ 20 µA Max -5V @ 50 µA Typ to -10V @ 800 µA Max
1. All specifications apply when operated with bias voltages of 0V for Vin Low and -5 to -10V for Vin High, and 50 ohm impedance at all RFports, unless otherwise specified....
Similar Datasheet