300mA RF ULDO REGULATOR General Description
Features
Data Sheet AP2210
The AP2210 is a 300mA ULDO regulator which pro...
300mA RF ULDO
REGULATOR General Description
Features
Data Sheet AP2210
The AP2210 is a 300mA ULDO
regulator which provides very low noise, ultra low dropout voltage (typically 250mV at 300mA), very low standby current (1µA maximum) and excellent power supply ripple rejection (PSRR 75dB at 100Hz) in battery powered applications, such as handsets, PDAs and in noise sensitive applications, such as RF electronics.
The AP2210 also features individual logic compatible enable/shutdown control inputs, a low power shutdown mode for extended battery life, over current protection, over temperature protection, as well as reversed-battery protection.
The AP2210 has 2.5V, 2.8V, 3.0V, 3.3V, 3.6V, 4.0V, 5.0V and ADJ versions.
The AP2210 is available in space saving SOT-23-3 and SOT-23-5 packages.
· Up to 300mA Output Current · Excellent ESR Stability · Low Standby Current · Low Dropout Voltage: VDROP=250mV at 300mA · High Output Accuracy: ± 1% · Good Ripple Rejection Ability: 75dB at 100Hz
and IOUT=100µA · Tight Load and Line Regulation · Low Temperature Coefficient · Over Current Protection · Thermal Protection · Reverse-battery Protection · Logic-controlled Enable
Applications
· Cellular Phones · Cordless Phones · Wireless Communicators · PDAs/Palmtops · PC Mother Board · Consumer Electronics
Jan. 2012 Rev. 1. 6
SOT-23-3
SOT-23-5
Figure 1. Package Types of AP2210
BCD Semiconductor Manufacturing Limited 1
300mA RF ULDO
REGULATOR Pin Configuration
N Package (SOT-23-3)
VIN
3
1
GND
...