STEP-UP DC-DC CONVERTER
1.5MHz STEP-UP DC-DC CONVERTER
General Description
Features
Data Sheet AP3012
The AP3012 is a high power, constant f...
Description
1.5MHz STEP-UP DC-DC CONVERTER
General Description
Features
Data Sheet AP3012
The AP3012 is a high power, constant frequency, current mode PWM, inductor based, step-up (boost) converter. The converter operates at high frequency (1.5MHz) so that a small, low profile inductor can be used.
The AP3012 has built-in overvoltage protection (OVP) to allow the device goes into shutdown mode when the output voltage exceeds the OVP threshold of 29V.
The AP3012 is available in standard SOT-23-5 package.
· High Efficiency up to 81% · Adjustable Output Voltage up to 29V · Shutdown Current 1µA Typical · 1.5MHz Switching Frequency · 36V 500mA Rugged Integrated Bipolar Switch · Built-in Soft-start to Reduce Inrush Current Dur-
ing Start-up · On-chip Overvoltage Protection · Uses Low ESR Ceramic Output Capacitor · Uses Small Inductor
Applications
· LCD/OLED Display Bias Supply · White LED Driver for LCD Display Backlights · Cellular Phones
May 2010 Rev. 1. 6
SOT-23-5
Figure 1. Package Type of AP3012 BCD Semiconductor Manufacturing Limited
1
1.5MHz STEP-UP DC-DC CONVERTER Pin Configuration
K Package (SOT-23-5)
SW 1 GND 2
FB 3
5 VIN 4 SHDN
Figure 2. Pin Configuration of AP3012 (Top View)
Data Sheet AP3012
Pin Description
Pin Number Pin Name
Function
Switch Pin. Connect inductor/diode here. The output voltage can go up to 29V but should not 1 SW exceed this limit. If the voltage on this pin is higher than the overvoltage protection (OVP)
threshold, the device can go into shutdown...
Similar Datasheet