DatasheetsPDF.com

MM1671 Dataheets PDF



Part Number MM1671
Manufacturers Mitsumi Electronics
Logo Mitsumi Electronics
Description (MM1671 - MM1677) Low Voltage Operating 75hom Driver
Datasheet MM1671 DatasheetMM1671 Datasheet (PDF)

MITSUMI Low Voltage Operating 75Ω Driver MM1671~MM1677 Series Low Voltage Operating 75Ω Driver Monolithic IC MM1671~MM1677 Series Outline July 8, 2003 This IC is a 75Ω driver with a built-in LPF that can operate at low voltage. Operationg supply voltage supports 3V and 5V systems, and it is ideal for video signal output in devices ranging from portable equipment such as digital still cameras to stationary equipment such as DVD players. It incorporates a high-performance 4thorder LPF, which .

  MM1671   MM1671



Document
MITSUMI Low Voltage Operating 75Ω Driver MM1671~MM1677 Series Low Voltage Operating 75Ω Driver Monolithic IC MM1671~MM1677 Series Outline July 8, 2003 This IC is a 75Ω driver with a built-in LPF that can operate at low voltage. Operationg supply voltage supports 3V and 5V systems, and it is ideal for video signal output in devices ranging from portable equipment such as digital still cameras to stationary equipment such as DVD players. It incorporates a high-performance 4thorder LPF, which is ideal for removing DAC sampling noise. In addition, ultra-low current consumption has been achieved by suppressing current consumption in power-save mode to under 1µA. This lengthens battery life in portable devices. The built-in amp gain on these series ICs is available: 6dB/9dB/12dB/16.5dB, thus enabling support for DAC and a variety of output amplitudes. The series offers a choise of either with or without input clamp, allowing support for a range of video signals, other than composite signals. Line-up Model Name MM1671 MM1672 MM1673 MM1674 MM1675 MM1676 MM1677 Clamp Built-in amplifier SAG measures pin Power supply voltage 6dB 2.8~5.5V 9dB 2.8~5.5V 12dB 2.8~5.5V 6dB 2.8~5.5V 9dB 2.8~5.5V www.DataSheet4U.com 12dB 2.8~5.5V 16.5dB 2.8~5.5V Features 1. Operating supply voltage 2. Operating ambient temperature 3. Current consumption (no signal) 4. Current consumption in power-save mode 5. High-precision voltage gain 6. Includes a high-performance 4th-order LPF 2.8~5.5V (supports 3V and 5V systems) -40~85°C 7.0mA typ. 1.0µA max. 6±0.3dB at 100kHz (MM1671) 6.75MHz/100kHz max. ±1.0dB 27MHz/100kHz typ. -40dB 7. Incorporates a sag auxiliary circuit 8. Built-in amp output gain available in these series models (6dB/9dB/12dB/16.5dB) 9. The series offers a choise of either with or without input clamp. 10. Mounted in a ultra-small package Package SOT-26A MITSUMI Low Voltage Operating 75Ω Driver MM1671~MM1677 Series Pin Assignment 6 5 4 1 2 3 1 2 3 4 5 5 PS OUT SAG IN GND VCC SOT-26A (TOP VIEW) Block Diagram VCC 6 *1 IN 4 LPF 6.75MHz PS 1 3 SAG 5 GND *2 75Ω Driver OUT 2 1 Input Clamp * bias clamp MM1671 MM1672 MM1673 MM1674 MM1675 MM1676 MM1677 6dB ( 2) * 2 Built-in amplifier * 9dB( 2) 12dB ( 2) * * 16.5dB ( 2) * MITSUMI Low Voltage Operating 75Ω Driver MM1671~MM1677 Series Pin Description Pin no. 1 Pin name PS Function Power save 10k 1 10k Internal equivalent circuit diagram GND 2 3 OUT SAG Signal output SAG correction VCC 2 3 500 GND 4 IN Signal input VCC 4 100µ 500µ GND 5 6 GND VCC GND VCC 20k MITSUMI Low Voltage Operating 75Ω Driver MM1671~MM1677 Series Absolute Maximum Ratings (Ta=25°C) Item Storage temperature Operating temperature Supply Voltage Allowable loss Symbol TSTG TOPR VCC max. Pd Ratings -65~+150 -40~+85 7 200 Units °C °C V mW Recommended Operating Conditions Item Operating temperature Operating voltage Symbol TOPR VCCOP Ratings -40~+85 2.8~5.5 Units °C V Electrical Characteristics (Except where not.


MM1567 MM1671 MM1672


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)