MITSUMI
Driver IC for Vibrators MM1426
Driver IC for Vibrators
Monolithic IC MM1426
Outline
This IC was developed as ...
MITSUMI
Driver IC for Vibrators MM1426
Driver IC for Vibrators
Monolithic IC MM1426
Outline
This IC was developed as a driver for vibrator motors, and has an output voltage set at 1.3V. The input voltage is monitored, and if a constant voltage is not input the output is turned off.
Features
1. Compact package for small mounting area. 2. In addition to output control through the input voltage, the IC can be turned on and off through the CONT pin. 3. Good ripple rejection. 4. Output currents of up to 150mA. 5. Operating voltage of up to 12V. 6. Output voltage is available in 0.1V steps from 1.2V to 2.0V.
Package
SOT-25A
Applications
Cellular phones, PHS, game, pagers.
www.DataSheet4U.com
Pin Assignment
1 5 4 2 3 1 2 3 4 5 SOT-25 CONT GND N.C VOUT VIN
MITSUMI
Driver IC for Vibrators MM1426
Equivalent Circuit Diagram
Pin Description
Pin No. Pin name 1 CONT Functions Output voltage on/off-control pin VCONT L H Output OFF ON Equivalent circuit diagram
Connect cont-terminal with VIN, when it is not used. 2 3 4 5 GND N.C VOUT VIN
Regulator Output pin Voltage-supply input pin Output voltage is not output when input voltage is less than input voltage detection value. Note that consumption current flows even when output voltage is OFF due to input voltage detection. Turn output OFF with the CONT pin in order to suppress consumption current completely. GND pin
MITSUMI
Driver IC for Vibrators MM1426
Absolute Maximum Ratings
Item Operating temperature Storage temperature Sup...