J270

J270 J270 P-Channel Switch This device is designed for low level analog switching sample and hold circuits and chopper stabilized amplifiers. Sourced from process 88. 1 TO-92 1. Drain 2. Gate 3. Source Absolute Maximum Ratings* Ta=25°C unless otherwise noted Symbol VDG VGS IGF TJ, TSTG Parameter Drain-Gate Voltage Gate-Source Voltage Forward Gate Current Operating and Storage Junction Temperature Range Ratings -30 30 50 -55 ~ 150 Units V V mA °C * This ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These rating are based on a maximum junction temperature of 150 degrees C. 2) These are steady limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Electrical Characteristics Ta=25°C unless otherwise noted Symbol Off Characteristics V(BR)GSS IGSS VGS(off) IDSS gfs goss Parameter Test Condition IG = -1.0µA, VDS = 0 VGS = -20V, VDS = 0 VDS = -15V, ID = 1.0nA VDS = -15V, VGS = 0 VGS = 0V, VDS = 15V, f = 1.0kHz VGS = 0V, VDS = 15V, f = 1.0kHz 0.5 -2.0 6000 Min. 30 200 2.0 -15 15000 200 Max. Units V pA V mA µmhos µmhos Gate-Source Breakdwon Voltage Gate Reverse Current Gate-Source Cutoff Voltage Zero-Gate Voltage Drain Current * Forward Transferconductance Common- Source Output Conductance On Characteristics Small Signal Characteristics Thermal Characteristics TA=25°C unless otherwise noted Symbol PD RθJC RθJA Parameter Total Device Dissipation Derate above 2...