DatasheetsPDF.com

LT1241 Dataheets PDF



Part Number LT1241
Manufacturers Linear Technology
Logo Linear Technology
Description High Speed Current Mode Pulse Width Modulators
Datasheet LT1241 DatasheetLT1241 Datasheet (PDF)

LT1241 Series High Speed Current Mode Pulse Width Modulators FEATURES s s s s s s s s s s DESCRIPTIO s s Low Start-Up Current: < 250µA 50ns Current Sense Delay Current Mode Operation: To 500kHz Pin Compatible with UC1842 Series Undervoltage Lockout with Hysteresis No Cross-Conduction Current Trimmed Bandgap Reference 1A Totem Pole Output Trimmed Oscillator Frequency and Sink Current Active Pull-Down on Reference and Output During Undervoltage Lockout High Level Output Clamp: 18V Current Sens.

  LT1241   LT1241



Document
LT1241 Series High Speed Current Mode Pulse Width Modulators FEATURES s s s s s s s s s s DESCRIPTIO s s Low Start-Up Current: < 250µA 50ns Current Sense Delay Current Mode Operation: To 500kHz Pin Compatible with UC1842 Series Undervoltage Lockout with Hysteresis No Cross-Conduction Current Trimmed Bandgap Reference 1A Totem Pole Output Trimmed Oscillator Frequency and Sink Current Active Pull-Down on Reference and Output During Undervoltage Lockout High Level Output Clamp: 18V Current Sense Leading Edge Blanking APPLICATI s s S Off-Line Converters DC/DC Converters , LTC and LT are registered trademarks of Linear Technology Corporation. The LT ®1241 series devices are 8-pin, fixed frequency, current mode, pulse width modulators. They are improved plug compatible versions of the industry standard UC1842 series. These devices have both improved speed and lower quiescent current. The LT1241 series is optimized for off-line and DC/DC converter applications. They contain a temperature-compensated reference, high gain error amplifier, current sensing comparator and a high current totem pole output stage ideally suited to driving power MOSFETs. Start-up current has been reduced to less than 250µA. Cross-conduction current spikes in the output stage have been eliminated, making 500kHz operation practical. Several new features have been incorporated. Leading edge blanking has been added to the current sense comparator. Trims have been added to the oscillator circuit for both frequency and sink current, and both of these parameters are tightly specified. The output stage is clamped to a maximum VOUT of 18V in the on state. The output and the reference output are actively pulled low during undervoltage lockout. BLOCK DIAGRA REFERENCE ENABLE 5V REF MAIN BIAS REFERENCE PULL-DOWN RT/CT 4 OSCILLATOR T S R 6 OUTPUT COMP FB 1 1mA 2 2.5V 5.6V 1V – + 2R – R BLANKING + 1.5V ISENSE 3 U UV LOCKOUT 8 7 VREF VCC OUTPUT PULL-DOWN 5 18V GND W UO + – 1241 BD01 1 LT1241 Series ABSOLUTE AXI U RATI GS PACKAGE/ORDER I FOR ATIO TOP VIEW COMP 1 FB 2 ISENSE 3 RT/CT 4 J8 PACKAGE 8-LEAD CERDIP 8 7 6 5 VREF VCC OUTPUT GND Supply Voltage ........................................................ 25V Output Current ....................................................... ± 1A* Output Energy (Capacitive Load per Cycle) ...............5µJ Analog Inputs (Pins 2, 3) ............................... – 0.3 to 6V Error Amplifier Output Sink Current...................... 10mA Power Dissipation at TA ≤ 25°C ................................ 1W Operating Junction Temperature Range LT124XC ............................................. 0°C to 100°C LT124XI......................................... – 40°C to 100°C LT124XM........................................ – 55°C to 125°C Storage Temperature Range ................. – 65°C to 150°C Lead Temperature (Soldering, 10 sec).................. 300°C *The 1A rating for output current is based on transient switching requirements.


LT1240-7Z LT1241 LT1246


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)