Automatic Picture Tube Bias Control Circuit
®
CA3224E
DUCT E NT E PRO T E L O LACEM P E Sheet OBS DataD R ED MEN ECOM
October 2002
FN1553.2
NO R
Automatic Pict...
Description
®
CA3224E
DUCT E NT E PRO T E L O LACEM P E Sheet OBS DataD R ED MEN ECOM
October 2002
FN1553.2
NO R
Automatic Picture Tube Bias Control Circuit Description
The CA3224E is an automatic picture tube bias control circuit used in color TV receiver CRT drive circuits. It is used to provide dynamic bias control of the grey scale both initially and over the CRT operating life, compensating for CRT cutoff changes. The CA3224E provides automatic continuous control of the cutoff current in each gun of a three-gun color CRT. From an input pulse amplitude proportional to the difference between the desired and the actual CRT cutoff, a gated sample/hold circuit generates a DC correction voltage which correctly biases the CRT driver circuit. The sample/hold bias correction takes place each frame following the vertical blanking. Figure 1 shows a block diagram of the CA3224E. The functions include three identical servo loop transconductance amplifiers with a sample/hold switch and buffer amplifier plus control logic, internal bias and a mode.
Features
Automatic Picture Tube Bias Cutoff Control Automatic Background Color Balance Eliminates Grey Scale Adjustments Compensates for Cathode-to-Heater Leakage Electrostatic Protection on All Pins Servo Loop Design Wide Dynamic Range Three-Gun Control Minimal External Components
Part Number Information
PART NUMBER CA3224E TEMP. RANGE (oC) -40 to 85 PACKAGE 22 Ld PDIP PKG. NO. E22.4
Pinout
CA3224E (PDIP) TOP VIEW
GROUND CHAN...
Similar Datasheet