EFFECT SWITCH. AH182 Datasheet

AH182 SWITCH. Datasheet pdf. Equivalent

Part AH182
Description (AH182 / AH183) LOW POWER HALL EFFECT SWITCH
Feature AH182/AH183 LOW POWER HALL EFFECT SWITCH Features • Micropower operation • 2.5V to 5.5V battery ope.
Manufacture Diodes Incorporated
Datasheet
Download AH182 Datasheet



AH182
AH182/AH183
LOW POWER HALL EFFECT SWITCH
Features
Micropower operation
2.5V to 5.5V battery operation
Offset Canceling Technology
Superior temperature stability
Extremely Low Switch-Point Drift
Insensitive to Physical Stress
-40°C to 85°C operating temperature
Lead Free packages: SIP-3L and SC59 (Commonly
known as SOT23 in Asia)
SIP-3L and SC59: Available in “Green” Molding
Compound (No Br, Sb)
Lead Free Finish / RoHS Compliant (Note 1)
General Description
AH182/AH183 is a three-terminal Hall effect sensor device with
an output driver, mainly designed for battery–operation,
hand-held equipment (such as cellular and cordless phones, and
PDA’s) The total operation power is down to 15uW in the
2.75V supply.
The south pole of sufficient strength will turn the output on in
SIP-3L but the north pole of sufficient strength will turn the output
on in SC59 package. The output will be turned off under no
magnetic field.
While the magnetic flux density (B) is larger than operation point
(Bop), the output will be turned on (low), the output is held until
B is lower than the release point (Brp), then turned off. The
difference between AH182 and AH183 is that the former
consumes less power than that of the latter in the Hall sensor
operation.
Applications
Cover detector
Speed measurement
Home safety
Typical Circuit *
2.5~5.5V
C
AH182/AH183
RL
Output
Gnd
* C is for power stabilization and to strengthen the noise immunity, the recommended capacitance is 10nF~100nF.
RL is the pull-up resistor, the recommended resistance is 10Kohm~100Kohm.
AH182/AH183 Rev. 8
DS31024
1 of 10
www.diodes.com
NOVEMBER 2009
© Diodes Incorporated



AH182
AH182/AH183
LOW POWER HALL EFFECT SWITCH
Ordering Information
AH182 / AH183 - X X - X
CMOS Hall-effect Switch
Package
P : SIP-3L
W : SC59
Lead Free
L : Lead Free
G : Green
Packing
A : Ammo Box (Note 3)
B : Bulk (Note 4)
7 : Tape & Reel
Device
AH182/AH183-PL-A
AH182/AH183-PL-B
AH182/AH183-PG-A
AH182/AH183-PG-B
AH182/AH183-WL-7
AH182/AH183-WG-7
Package
Code
Packaging
(Note 2)
Bulk
Part
Quantity Number
Suffix
7” Tape and Reel
Part
Quantity
Number
Suffix
P
SIP-3L
NA
NA
NA
NA
P
SIP-3L
1000
-B
NA NA
P
SIP-3L
NA
NA
NA
NA
P
SIP-3L
1000
-B
NA NA
W SC59 NA NA 3000/Tape & Reel -7
W SC59 NA NA 3000/Tape & Reel -7
Ammo Box
Part
Quantity Number
Suffix
4000/Box
-A
NA NA
4000/Box
-A
NA NA
NA NA
NA NA
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at
http://www.diodes.com/products/lead_free.html
2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
3. Ammo Box is for SIP-3L Spread Lead.
4. Bulk is for SIP-3L Straight Lead.
Pin Assignments
(1) SIP-3L
(Top view)
3. Output
2. GND
1. Vdd
(2) SC59 (Commonly known as SOT23 in Asia)
(Top view)
GND 2.
3. Output
1. Vdd
Pin Description
Pin Name
Vdd
GND
Output
P/I/O
P/I
P
O
Pin #
1
2
3
Description
Power Supply Input
Ground
Output Pin
AH182/AH183 Rev. 8
DS31024
2 of 10
www.diodes.com
NOVEMBER 2009
© Diodes Incorporated





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)