AH375
Single Phase Hall Effect Latch
Features
- 2.2V to 20V DC operation voltage - Temperature compensation - Wide ope...
AH375
Single Phase Hall Effect Latch
Features
- 2.2V to 20V DC operation voltage - Temperature compensation - Wide operating voltage range - Open drain pre-driver - 25mA maximum sinking output current - Package: SIP3, SOT23
General Description
AH375 is an integrated Hall effect latched sensor designed for electronic commutation of brush-less DC motor applications. The device includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies the Hall voltage, and a schmitt trigger to provide switching hysteresis for noise rejection, and open drain output. An internal bandgap
regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range. If a magnetic flux density larger than threshold Bop, DO is turned on(low). The output state is held until a magnetic flux density reversal falls below Brp causing DO to be turned off (high).
Applications
- Brush-less DC Motor - Brush-less DC Fan - Revolution counting - Speed measurement
Pin Assignments
375
Pin Descriptions
Name Vdd GND OUT P/I/O P P O Pin # 1 2 3 Description Positive Power Supply Ground Output Pin
2
(Top view)
375
1 : Vdd
1 3
2 : GND 3 : OUT
(SOT23 package) 1 2 3 (SIP package)
Ordering Information
AH375 X - X X X
Wafer Body Blank or A~Z : if necessary to specify
Package P: SIP3 W: SOT23
Lead L : Lead Free
Packing Blank : Bulk A : Tape & Reel
This datasheet contains new product information. Anachip Corp. res...