ICs for use with 3rd Overtone Crystal Oscillators
◆CMOS ◆Oscillation Frequency : 125MHz (MAX.) ◆3-State Output ◆Built-in Oscillation Capacitor ◆Built-in Oscillation Feedb...
Description
◆CMOS ◆Oscillation Frequency : 125MHz (MAX.) ◆3-State Output ◆Built-in Oscillation Capacitor ◆Built-in Oscillation Feedback Resistor ◆Mini Mold SOT-26 Package
■APPLICATIONS
●Crystal Oscillation Modules ●Computer, DSP Clocks ●Communication Equipment ●Various System Clocks
■GENERAL DESCRIPTION
The XC2163 series are high frequency, low current consumption CMOS ICs with built-in crystal oscillator and divider circuits. Output is selectable from any one of the following values for f0: f0/1, f0/2, f0/4, f0/8. With oscillation capacitors and a feedback resistors built-in, it is possible to configure a stable 3rd overtone oscillator using only an external crystal oscillator.
www.DataSheet4U.com
■FEATURES
Oscillation Frequency (3rd Overtone) : 40MHz ~ 125MHz (Rf, Cg, Cd internal; 5.0V) : 57MHz ~ 125MHz (Rf, Cg, Cd internal; 3.3V) : 20MHz ~ 125MHz (Rf, Cg, Cd external) Divider Ratio Output Operating Voltage Range Ultra Small Package : Selectable from f0/1, f0/2, f0/4, f0/8. : 3-State : 3.3V ±10%, 5.0V ±10% : SOT-26 mini mold
Also available is an external oscillation capacitor/external
oscillation feedback resistor type, which makes oscillation frequency control possible.
Low Current Consumption : Stand-by function included * * Oscillation continues in stand-by mode
■PIN CONFIGURATION
■PIN ASSIGNMENT
PIN NUMBER 1 2 3 4 5 6 PIN NAME /INH XT VSS Q0 VDD /XT FUNCTION Stand-by Control* Crystal Oscillator Connection (Input) GND Clock Output Power Supply Crystal Oscillator Connection (...
Similar Datasheet