Document
05076
Only One Name Means ProTek’Tion™
500 WATT MULTI-LINE ULTRA LOW CAPACITANCE TVS ARRAY
PLCDA03 - PLCDA24
DESCRIPTION
The PLCDAxx Series are ultra low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard TTL and CMOS bus line applications against the damaging effects of ESD, tertiary lightning and switching transients. The PLCDAxx Series has a peak pulse power rating of 500 Watts for an 8/20µs waveshape. This device series meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements.
SO-8 PACKAGE
FEATURES
• Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-
Gnd) & Level 3(Line-Line) • 500 Watts Peak Pulse Power per Line (tp = 8/20µs) • Bidirectional Configuration • Available in Multiple Voltages Ranging from 3V to 24V • Protects Two Lines • Ultra Low Capacitance: 5pF • RoHS Compliant • REACH Compliant
MECHANICAL CHARACTERISTICS
• Molded JEDEC SO-8 Package • Approximate Weight: 70 milligrams • Lead-Free Pure-Tin Plating (Annealed) • Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • 12mm Tape and Reel Per EIA Standard 481 • Flammability Rating UL 94V-0
APPLICATIONS
• Computer Interface Protection • Ethernet - 10/100/1000 Base T • Audio/Video Inputs • Cellular Phone Terminals
PIN CONFIGURATION
8765
05076.R11 5/18
1234
Page 1
ISO 9001: 2015 CERTIFIED
05076
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
PLCDA03 - PLCDA24
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
SYMBOL
Operating Temperature Storage Temperature Peak Pulse Power (tp = 8/20µs) - See Figure 1
TL TSTG PPP
VALUE -55 to 150 -55 to 150
500
UNITS °C °C
Watts
PART NUMBER (Note 1)
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
DEVICE MARKING
RATED STAND-OFF VOLTAGE
MINIMUM BREAKDOWN
VOLTAGE
MAXIMUM CLAMPING VOLTAGE
(Fig. 2)
MAXIMUM LEAKAGE CURRENT
MAXIMUM CAPACITANCE
(Note 2)
VVOWLMTS
@1mA VVO(LBRT)S
@VIOPV=LCT1SA
@µVIDAWM
@0V, 1MHz C pF
PLCDA03
SGA
3.3
4.5
7.0
125
5
PLCDA05
SGB
5.0
6.0
9.8
20
5
PLCDA08
SGF
8.0
8.5 13.4
10
5
PLCDA12
SGC
12.0
13.3
19.0
1
5
PLCDA15
SGD
15.0
16.7
24.0
1
5
PLCDA24
SGE
24.0
26.7
43.0
1
5
NOTES 1. Devices are designed to be used in parallel (see application). For other applications, contact the factory. Do not apply surge in the forward direction of this device. 2. Do not surge from pins 8 to 1, 2 to 7, 6 to 3, and 4 to 5. PIV typically greater than 100V for each rectifier diode. Electrical characteristics apply to pins 1 to 8, 7 to 2, 3 to 6 and 5 to 4.
05076.R11 5/18
Page 2
ISO 9001: 2015 CERTIFIED
05076
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
10,000
FIGURE 1 PEAK PULSE POWER VS PULSE TIME
PLCDA03 - PLCDA24
PPP - Peak Pulse Power - Watts
1,000 100
500W, 8/20µs Waveform
1.