Cascadable Amplifier 5 to 200 MHz
Features
• • • • AVAILABLE IN SURFACE MOUNT LOW NOISE: 2.1 dB (TYP.) HIGH GAIN 18 dB (...
Cascadable Amplifier 5 to 200 MHz
Features
AVAILABLE IN SURFACE MOUNT LOW NOISE: 2.1 dB (TYP.) HIGH GAIN 18 dB (TYP.) LOW VSWR <1.4:1 (TYP.)
A71/ SMA71
V2
Product Image
Description
The A71 RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This single stage bipolar
transistor feedback amplifier design displays impressive performance over a broadband frequency range. Both TO-8 and Surface Mount packages are Hermetically sealed, and MIL-STD-883 environmental screening is available.
Ordering Information
Part Number
A71 SMA71 CA71
Package
TO-8 Surface Mount SMA Connectorized
Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC
Typical Parameter
Frequency Small Signal Gain (min) Gain Flatness (max) Reverse Isolation Noise Figure (max) Power Output @ 1 dB comp. (min) IP3 IP2 Second Order Harmonic IP VSWR Input / Output (max) DC Current @ 15 Volts (max) mA
Absolute Maximum Ratings
Parameter
Storage Temperature Case Temperature DC Voltage Continuous Input Power Short Term Input power (1 minute max.)
Guaranteed 0º to 50ºC
5-200 16.5 ±0.8
Units 25ºC
MHz dB dB dB dB dBm dBm dBm dBm 1-300 18.0 ±0.5 22 2.1 -2.5 +10 +11.5 +18.5 1.4:1 / 1.4:1 9 1.9:1 / 1.9:1 11 2.0:1 / 2.0:1 13 2.5 -3.0 2.8 -3.5
Absolute Maximum
-62ºC to +125ºC 125ºC +18 V +13 dBm 50 mW 0.5 W +125ºC
-54º to +85ºC*
5-200 16.0 ±1.0
Peak Power (3 µsec max.) “S” Series Burn-In Temperature (case)
Thermal Data: VCC = +15 VDC
Para...