USB3300

USB3300 Hi-Speed USB Host, Device or OTG PHY with ULPI Low Pin Interface PRODUCT FEATURES „ Datasheet „ „ „ „ „ „ „ „ „ „ „ „ „ „ USB-IF Hi-Speed certified to the Universal Serial Bus Specification Rev 2.0 Interface compliant with the ULPI Specification revision 1.1 in 8-bit mode Industry standard UTMI+ Low Pin Interface (ULPI) Converts 54 UTMI+ signals into a standard 12 pin Link controller interface 54.7mA Unconfigured Current (typical) - ideal for bus powered applications 83uA suspend current (typical) - ideal for battery powered applications Latch-Up performance exceeds 150 mA per EIA/JESD 78, Class II ESD protection levels of ±8kV HBM without external protection devices Integrated protection to withstand IEC61000-4-2 ESD tests (±8kV contact and ±15kV air) per 3rd party test facility Supports FS pre-amble for FS hubs with a LS device attached (UTMI+ Level 3) Supports HS SOF and LS keep-alive pulse Includes full support for the optional On-The-Go (OTG) protocol detailed in the On-The-Go Supplement Revision 1.0a specification Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP) Allows host to turn VBUS off to conserve battery power in OTG applications Supports OTG monitoring of VBUS levels with internal comparators. Includes support for an external VBUS or fault monitor. „ „ „ „ „ „ „ Low Latency Hi-Speed Receiver (43 Hi-Speed clocks Max) allows use of legacy UTMI Links with a ULPI wrapper Integrated Pull-up resistor on ST...