DatasheetsPDF.com

Power Amplifier. CMQ1332-QH Datasheet

DatasheetsPDF.com

Power Amplifier. CMQ1332-QH Datasheet






CMQ1332-QH Amplifier. Datasheet pdf. Equivalent




CMQ1332-QH Amplifier. Datasheet pdf. Equivalent





Part

CMQ1332-QH

Description

QFN Plastic Packaged Power Amplifier



Feature


12.5-14.5 GHz 1.5W QFN Plastic Packaged Power Amplifier September 2006 - Rev 17 -Sep-06 CMQ1332-QH Features 32 dBm (Ty p) Saturated Output Power 33 dB (Typ) L inear Gain ESD Protection On Die Uncond itionally Stable Low Cost, Surfae Mount Package 4x4x1.4 mm RoHS Compliant 7V, 770mA Applications Ku-Band VSAT Transm it Subsystems General Description The CMQ1332-QH is a pH.
Manufacture

Mimix Broadband

Datasheet
Download CMQ1332-QH Datasheet


Mimix Broadband CMQ1332-QH

CMQ1332-QH; EMT power amplifier packaged in a 4X4 QF N plastic package. The CMQ1332-QH is se lf contained with 50 ohm input and outp ut terminals. The PAM is unconditionall y stable and the internal matching allo ws for a reduction in external componen ts making this product a simple and low cost solution. RoHS compliance and on- chip ESD protection make it an ideal so lution in all manu.


Mimix Broadband CMQ1332-QH

facturing environments. The power amplif ier is intended for use as the final RF amplifier in the extended Ku-Band www. DataSheet4U.com satellite applications. Absolute Maximum Ratings Drain Voltag e (+Vdd) Gate Voltage (Vgg) Quiescent C urrent (Idq) Gate Current (Ig) RF Input Power (Pin) Dissipated Power (Piss) St orage Temperature Operating Backside Te mperature +8 V -3 .


Mimix Broadband CMQ1332-QH

V 1000 mA 5 mA +11 dBm 8W -50 ºC to +15 0 ºC -40 ºC to +80 ºC Electrical Ch aracteristics (T = +25ºC,Vd = 7V, Id = 770mA) Parameter Operating Frequency ( F) Drain Current (At Saturation) (Id) D rain Voltage (Vd) Gate Voltage (RF ON) (Vg) Linear Gain (S21) Input Reflection Coefficient (S11) Output Reflection Co efficient (S22) Noise Figure (NF) Satur ated Output Power (Psat.

Part

CMQ1332-QH

Description

QFN Plastic Packaged Power Amplifier



Feature


12.5-14.5 GHz 1.5W QFN Plastic Packaged Power Amplifier September 2006 - Rev 17 -Sep-06 CMQ1332-QH Features 32 dBm (Ty p) Saturated Output Power 33 dB (Typ) L inear Gain ESD Protection On Die Uncond itionally Stable Low Cost, Surfae Mount Package 4x4x1.4 mm RoHS Compliant 7V, 770mA Applications Ku-Band VSAT Transm it Subsystems General Description The CMQ1332-QH is a pH.
Manufacture

Mimix Broadband

Datasheet
Download CMQ1332-QH Datasheet




 CMQ1332-QH
12.5-14.5 GHz
1.5W QFN Plastic Packaged Power Amplifier
September 2006 - Rev 17-Sep-06
CMQ1332-QH
Features
32 dBm (Typ) Saturated Output Power
33 dB (Typ) Linear Gain
ESD Protection On Die
Unconditionally Stable
Low Cost, Surfae Mount Package
4x4x1.4 mm
RoHS Compliant
7V, 770mA
Applications
Ku-Band VSAT Transmit Subsystems
General Description
The CMQ1332-QH is a pHEMT power amplifier packaged in a 4X4
QFN plastic package. The CMQ1332-QH is self contained with 50
ohm input and output terminals. The PAM is unconditionally
stable and the internal matching allows for a reduction in external
components making this product a simple and low cost solution.
RoHS compliance and on-chip ESD protection make it an ideal
solution in all manufacturing environments.The power amplifier is
intended for use as the final RF amplifier in the extended Ku-Band
www.DataSheet4U.comsatellite applications.
Absolute Maximum Ratings
Drain Voltage (+Vdd)
+8 V
Gate Voltage (Vgg)
-3 V
Quiescent Current (Idq)
1000 mA
Gate Current (Ig)
5 mA
RF Input Power (Pin)
+11 dBm
Dissipated Power (Piss)
8W
Storage Temperature
-50 ºC to +150 ºC
Operating Backside Temperature -40 ºC to +80 ºC
Electrical Characteristics (T = +25ºC,Vd = 7V, Id = 770mA)
Parameter
Units Min. Typ. Max.
Operating Frequency (F)
GHz 12.5
14.5
Drain Current (At Saturation) (Id)
mA 770
Drain Voltage (Vd)
Volts
6
7 7.5
Gate Voltage (RF ON) (Vg)
Volts
-2
- -0.2
Linear Gain (S21)
dB 33
Input Reflection Coefficient (S11)
dB -11
Output Reflection Coefficient (S22)
dB -8
Noise Figure (NF)
dB 9
Saturated Output Power (Psat)
dBm 31.0
32
Power @ 1dB Compression Gain (P1dB)
dBm 29
Power Added Efficiency (At Saturation) (PAE)
%
27
Gate Current (Igs)
mA - 0.5 5
Electrical Specifications (TA = -25C to 80C) Operation outside these limits can cause permanent damage.
Parameter
Condition
Units Min
Typ Max
Saturated Output Power Variation from room temperature
Linear Gain
Variation from room temperature
Stability
dB
dB
-0.7
-2.5 2.5
Unconditional Stable
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 5
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.




 CMQ1332-QH
12.5-14.5 GHz
1.5W QFN Plastic Packaged Power Amplifier
September 2006 - Rev 17-Sep-06
CMQ1332-QH
Typical Performance
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
12.5
Psat
Vd = 7V, Iq = 770mA, Pin = 5dBm
13 13.5 14
Frequency (GHz)
Psat
14.5
Small Signal Performance
6V, 770mA
35 30
30 25
25 20
20 15
15 10
10 5
50
0 -5
-5 -10
-10 -15
-15 -20
10 11 12 13 14 15 16 17 18
Frequency (GHz)
S21
S11
S22
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 5
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.




 CMQ1332-QH
12.5-14.5 GHz
1.5W QFN Plastic Packaged Power Amplifier
September 2006 - Rev 17-Sep-06
CMQ1332-QH
Recommended Application Circuit
Schematic
Biasing notes:
1. Dual bias is required.
2. 1000pf bypass capacitors are needed on PC board as close as
possible to device as shown in the schematic.
3. No DC block is required at RF IN/OUT
4. Negative (-) bias must be applied to Vgg before applying
positive (+) bias to Vdd.
1uF
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 5
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.



Recommended third-party CMQ1332-QH Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)