ISL22426

® ISL22426 Dual Digitally Controlled Potentiometer (XDCP™) Data Sheet July 17, 2006 FN6180.0 Low Noise, Low Power, SPI® Bus, 128 Taps The ISL22426 integrates two digitally controlled potentiometers (DCP) and non-volatile memory on a monolithic CMOS integrated circuit. The digitally controlled potentiometers are implemented with a combination of resistor elements and CMOS switches. The position of the wipers are controlled by the user through the SPI serial interface. Each potentiometer has an associated volatile Wiper Register (WR) and a non-volatile Initial Value Register (IVR) that can be directly written to and read by the user. The contents of the WR controls the position of the wiper. At power-up the device recalls the contents of the DCP’s IVR to the corresponding WR. The DCPs can be used as three-terminal potentiometers or as two-terminal variable resistors in a wide variety of applications including control, parameter adjustments, and signal processing. Features Two potentiometers in one package 128 resistor taps SPI serial interface Non-volatile storage of wiper position Wiper resistance: 70Ω typical @ 3.3V Shutdown mode Shutdown current 5µA max Power supply: 2.7V to 5.5V 50kΩ or 10kΩ total resistance High reliability - Endurance: 1,000,000 data changes per bit per register - Register data retention: 50 years @ T <55°C 14 Lead TSSOP Pinout ISL22426 (14 LEAD TSSOP) TOP VIEW www.DataSheet4U.com Pb-free plus anneal product (RoHS compliant) ...