Line Driver. EL1507 Datasheet

EL1507 Driver. Datasheet pdf. Equivalent

EL1507 Datasheet
Recommendation EL1507 Datasheet
Part EL1507
Description Medium Power Differential Line Driver
Feature EL1507; ® EL1507 Data Sheet March 26, 2007 FN7013.3 Medium Power Differential Line Driver The EL1507 is a .
Manufacture Intersil Corporation
Datasheet
Download EL1507 Datasheet





Intersil Corporation EL1507
®
Data Sheet
March 26, 2007
EL1507
FN7013.3
Medium Power Differential Line Driver
The EL1507 is a very low power dual operational amplifier
designed for central office and customer premise line driving
for DMT ADSL solutions. This device features a high drive
capability of 400mA while consuming only 7.5mA of supply
current per amplifier from ±12V supplies. This driver
achieves a typical distortion of less than -75dBc, at 1MHz
into a 50Ω load. The EL1507 is available in the thermally-
enhanced 16 Ld SO package, as well as a 16 Ld QFN
package. Both are specified for operation over the full
-40°C to +85°C temperature range.
The EL1507 has two control pins, C0 and C1. With the
selection of C0 and C1, the device can be set into full-IS
power, ¾-IS power, ½-IS power, and power down disable
modes. The EL1507 maintains excellent distortion and load
driving capabilities even in the lowest power settings.
Ordering Information
PART TAPE &
PKG.
PART NUMBER MARKING REEL PACKAGE DWG. #
EL1507CS
EL1507CS
- 16 Ld SOIC MDP0027
www.DataSheet4U.comEL1507CS-T7
EL1507CS-T13
EL1507CS
EL1507CS
7” 16 Ld SOIC MDP0027
13” 16 Ld SOIC MDP0027
EL1507CSZ
(See Note)
EL1507CSZ - 16 Ld SOIC MDP0027
(Pb-Free)
EL1507CSZ-T7 EL1507CSZ 7” 16 Ld SOIC MDP0027
(See Note)
(Pb-Free)
EL1507CSZ-T13 EL1507CSZ 13” 16 Ld SOIC MDP0027
(See Note)
(Pb-Free)
EL1507CL
1507CL
- 16 Ld QFN MDP0046
EL1507CL-T7 1507CL
7” 16 Ld QFN MDP0046
EL1507CL-T13 1507CL
13” 16 Ld QFN MDP0046
EL1507CLZ
(See Note)
1507CLZ
- 16 Ld QFN MDP0046
(Pb-Free)
EL1507CLZ-T7 1507CLZ
(See Note)
7” 16 Ld QFN MDP0046
(Pb-Free)
EL1507CL-T13 1507CLZ
(See Note)
13” 16 Ld QFN MDP0046
(Pb-Free)
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Features
• Drives 360mA at 16VP-P on ±12V supplies
• 40VP-P differential output drive into 100Ω
• -75dBc typical driver output distortion driving 50Ω at 1MHz
and 1/2-IS bias current
• Low quiescent current of 3.5mA per amplifier in 1/2-IS
mode
• Power down disable mode
• Pb-free plus anneal available (RoHS compliant)
Applications
• ADSL G.DMT and G.lite CO line driving
• G.SHDSL, HDSL2 line driver
• ADSL CPE line driving
• Video distribution amplifier
• Video twisted-pair line driver
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2001, 2005-2007. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.



Intersil Corporation EL1507
Pinouts
EL1507
(16 LD SO)
TOP VIEW
NC 1
16 VS+
VOUTA 2
VIN-A 3
15 VOUTB
+
14 VIN-B
GND* 4
13 GND*
GND* 5
12 GND*
VIN+A 6
11 VIN+B
GND 7
VS- 8
POWER
CONTROL
LOGIC
10 C1
9 C0
NOTE: *These GND Pins are heat spreaders
EL1507
EL1507
(16 LD QFN)
TOP VIEW
1 12
INA- 2
INA+ 3
GND 4
-
+
AMP A
-
+
AMP B
11 INB-
10 INB+
9 C1
2 FN7013.3
March 26, 2007



Intersil Corporation EL1507
EL1507
Absolute Maximum Ratings (TA = +25°C)
VS+ to VS- Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.4V
VS+ Voltage to Ground . . . . . . . . . . . . . . . . . . . . . . -0.3V to +26.4V
VS- Voltage to Ground . . . . . . . . . . . . . . . . . . . . . . . . -26.4V to 0.3V
Input C0/C1 to Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7V
VIN+ Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VS- to VS+
Current Into Any Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8mA
Continuous Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . 75mA
Operating Temperature Range . . . . . . . . . . . . . . . . .-40°C to +85°C
Storage Temperature Range . . . . . . . . . . . . . . . . . .-60°C to +150°C
Operating Junction Temperature . . . . . . . . . . . . . . .-40°C to +150°C
Power Dissipation . . . . . .See Power Supplies & Dissipation section
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
Electrical Specifications VS = ±12V, RF= 1.5kΩ, RL= 75Ω to GND, TA = +25°C. unless otherwise specified.
PARAMETER
DESCRIPTION
CONDITIONS
MIN TYP
AC PERFORMANCE
BW -3dB Bandwidth
HD Total Harmonic Distortion
dG Differential Gain
dθ Differential Phase
SR Slew Rate
DC PERFORMANCE
AV = +4
f = 1MHz, VO = 16VP-P, RL = 50Ω
AV = +2, RL = 37.5Ω
AV = +2, RL = 37.5Ω
VOUT from -4.5V to +4.5V
70
-75
0.17
0.1
350 500
VOS
Offset Voltage
ΔVOS
VOS Mismatch
ROL
Transimpedance
INPUT CHARACTERISTICS
VOUT from -4.5V to +4.5V
-17
-10
12
IB+ Non-Inverting Input Bias Current
IB- Inverting Input Bias Current
ΔIB- IB- Mismatch
eN Input Noise Voltage
iN+ +Input Noise Current
iN- -Input Noise Current
VIH Input High Voltage
VIL Input Low Voltage
IIH1 Input High Current for C1
IIH0 Input High Current for C0
IIL Input Low Current for C1 or C0
OUTPUT CHARACTERISTICS
C0 & C1 inputs
C0 & C1 inputs
C1 = 5V
C0 = 5V
C1 = 0V, C0 = 0V
-5
-30
-20
2.8
1.8
19
2.3
0.2
0.1
-1
VOUT
VOUT P
VOUT N
IOUT
SUPPLY
Loaded Output Swing Single Ended
Loaded Output Swing Single Ended
Loaded Output Swing Single Ended
Output Current
RL = 100Ω to GND
RL = 25Ω to GND
RL = 25Ω to GND
RL = 0Ω
±10.3
9.5
-8.2
±10.9
10.2
-9.8
500
VS
IS+ (Full Power)
Supply Voltage
Single supply
Positive Supply Current per Amplifier All outputs at 0V, C0 = C1 = 0V
5
7.5
MAX
UNIT
MHz
dBc
%
°
V/µs
17 mV
10 mV
3.5 MΩ
5 µA
30 µA
20 µA
nV/Hz
pA/Hz
pA/Hz
V
1.5 V
8 µA
4 µA
1 µA
V
V
V
mA
24 V
9 mA
3 FN7013.3
March 26, 2007





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)