MMIC Transmitter. XU1002 Datasheet

XU1002 Transmitter. Datasheet pdf. Equivalent

XU1002 Datasheet
Recommendation XU1002 Datasheet
Part XU1002
Description GaAs MMIC Transmitter
Feature XU1002; 18.0-25.0 GHz GaAs MMIC Transmitter May 2005 - Rev 13-May-05 Features Sub-harmonic Transmitter Inte.
Manufacture Mimix Broadband
Datasheet
Download XU1002 Datasheet




Mimix Broadband XU1002
18.0-25.0 GHz GaAs MMIC
Transmitter
May 2005 - Rev 13-May-05
Features
Sub-harmonic Transmitter
Integrated IR Mixer, LO Buffer & Output Amplifier
+20.0 dBm Output Third Order Intercept (OIP3)
2.0 dBm LO Drive Level
15.0 dB Image Rejection, 10.0 dB Conversion Gain
100% On-Wafer RF and DC Testing
100% Visual Inspection to MIL-STD-883 Method 2010
Chip Device Layout
U1002
General Description
Mimix Broadbands 18.0-25.0 GHz GaAs MMIC transmitter has a
+20.0 dBm output third order intercept and 15.0 dB image
rejection across the band.This device is an image reject sub-
harmonic anti-parallel diode mixer followed by a balanced two
stage output amplifier and includes an integrated LO buffer
amplifier.The image reject mixer reduces the need for
Absolute Maximum Ratings
unwanted sideband filtering before the power amplifier.The
Supply Voltage (Vd)
+4.5 VDC
use of a sub-harmonic mixer makes the provision of the LO
easier than for fundamental mixers at these frequencies. I and Q
mixer inputs are provided and an external 90 degree hybrid is
required to select the desired sideband.This MMIC uses Mimix
Broadbands 0.15 µm GaAs PHEMT device model technology,
and is based upon electron beam lithography to ensure high
repeatability and uniformity.The chip has surface passivation to
Supply Current (Id1,Id2)
Gate Bias Voltage (Vg)
Input Power (IF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
320, 165 mA
+0.3 VDC
0.0 dBm
-65 to +165 OC
-55 to MTTF Table3
MTTF Table3
protect and provide a rugged part with backside via holes and
gold metallization to allow either a conductive epoxy or
eutectic solder die attach process.This device is well suited for
(3) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Millimeter-wave Point-to-Point Radio, LMDS, SATCOM and VSAT
applications.
Electrical Characteristics (Ambient Temperature T = 25o C)
Parameter
Units Min. Typ. Max.
Frequency Range (RF) Upper Side Band
Frequency Range (RF) Lower Side Band
Frequency Range (LO)
Frequency Range (IF)
Output Return Loss RF (S22)
Small Signal Conversion Gain IF/RF (S21) 2
LO Input Drive (PLO)
Image Rejection 2
Isolation LO/RF @ LOx1/LOx2
Output Third Order Intercept (OIP3) 1,2
Drain Bias Voltage (Vd1)
Drain Bias Voltage (Vd2)
Gate Bias Voltage (Vg1,2)
Supply Current (Id1) (Vd1=3.5V, Vg=-0.3V Typical)
Supply Current (Id2) (Vd2=4.0V, Vg=-0.3V Typical)
(1) Measured using constant current.
(2) Measured using LO Input drive level of +2.0 dBm.
GHz 18.0 - 25.0
GHz 18.0 - 21.0
GHz 7.5
- 11.5
GHz DC - 3.0
dB - 16.0 -
dB - 10.0 -
dBm - +2.0 -
dBc - 15.0 -
dB - 10.0 -
dBm - +20.0 -
VDC - +3.5 +4.5
VDC - +4.0 +4.5
VDC -1.2 -0.3 +0.1
mA - 230 280
mA - 116 140
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 8
Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.



Mimix Broadband XU1002
18.0-25.0 GHz GaAs MMIC
Transmitter
May 2005 - Rev 13-May-05
Transmitter Measurements
15
14
13
12
11
10
9
8
7
6
5
16.0
XU1002 Vd1=3.5 V, Vd2=4.0 V, Id1=230 mA, Id2=116 mA, USB
LO=+2.0 dBm, IF=2.0 GHz, RF=-15.0 dBm, ~120 Devices
17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0
RF Frequency (GHz)
Max Median Mean -3sigma
26.0
U1002
15
14
13
12
11
10
9
8
7
6
5
16.0
XU1002 Vd1=3.5 V, Vd2=4.0 V, Id1=230 mA, Id2=116 mA, LSB
LO=+2.0 dBm, IF=2.0 GHz, RF=-15.0 dBm, ~120 Devices
17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0
RF Frequency (GHz)
Max Median Mean -3sigma
26.0
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
-50
-55
-60
16.0
XU1002 Vd1=3.5 V, Vd2=4.0 V, Id1=230 mA, Id2=116 mA, USB
LO=+2.0 dBm, IF=2.0 GHz, RF=-15.0 dBm, ~120 Devices
17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0
RF Frequency (GHz)
Max Median Mean -3sigma
26.0
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
16.0
XU1002 Vd1=3.5 V, Vd2=4.0 V, Id1=230 mA, Id2=116 mA, LSB
LO=+2.0 dBm, IF=2.0 GHz, RF=-15.0 dBm, ~120 Devices
17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0
RF Frequency (GHz)
Max Median Mean -3sigma
26.0
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
16.0
XU1002 Vd1=3.5 V, Vd2=4.0 V, Id1=230 mA, Id2=116 mA, USB/LSB
LO=+2.0 dBm, IF=2.0 GHz, RF=-15.0 dBm, ~130 Devices
17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0
RF Frequency (GHz)
Max Median Mean -3sigma
26.0
XU1002 Vd1=3.5 V, Vd2=4.0 V, Id1=230 mA, Id2=116 mA, USB/LSB
LO=+2.0 dBm, IF=2.0 GHz, RF=-15.0 dBm, ~130 Devices
0
-10
-20
-30
-40
-50
-60
14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
2xLO Frequency (GHz)
Max Median Mean -3sigma
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 8
Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.



Mimix Broadband XU1002
18.0-25.0 GHz GaAs MMIC
Transmitter
May 2005 - Rev 13-May-05
Transmitter Measurements (cont.)
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
17.0
XU1002 Vd1=3.5 V, Vd2=4.0 V, Id1=230 mA, Id2=116 mA, USB
LO=+2.0 dBm, IF=2.0 GHz, RF=-15.0 dBm, ~1240 Devices
18.0
19.0
20.0 21.0 22.0 23.0
RF Frequency (GHz)
Max Median Mean -3sigma
24.0
25.0
26.0
U1002
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
17.0
XU1002 Vd1=3.5 V, Vd2=4.0 V, Id1=230 mA, Id2=116 mA, LSB
LO=+2.0 dBm, IF=2.0 GHz, RF=-15.0 dBm, ~1240 Devices
18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0
RF Frequency (GHz)
Max Median Mean -3sigma
26.0
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
-50
-55
-60
17.0
XU1002 Vd1=3.5 V, Vd2=4.0 V, Id1=230 mA, Id2=116 mA, USB
LO=+2.0 dBm, IF=2.0 GHz, RF=-15.0 dBm, ~1240 Devices
18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0
RF Frequency (GHz)
Max Median Mean -3sigma
26.0
0
-5
-10
-15
-20
-25
-30
17.0
XU1002 Vd1=3.5 V, Vd2=4.0 V, Id1=230 mA, Id2=116 mA, LSB
LO=+2.0 dBm, IF=2.0 GHz, RF=-15.0 dBm, ~1240 Devices
18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0
RF Frequency (GHz)
Max Median Mean -3sigma
26.0
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 8
Characteristic Data and Specifications are subject to change without notice. ©2005 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)