MMIC Transmitter. XU1004 Datasheet

XU1004 Transmitter. Datasheet pdf. Equivalent


Mimix Broadband XU1004
32.0-45.0 GHz GaAs MMIC
Transmitter
August 2006 - Rev 02-Aug-06
Features
Sub-harmonic Transmitter
Integrated Mixer, LO Doubler/Buffer & Output Amplifier
+14.0 dBm Output Third Order Intercept (OIP3)
+4.0 dBm LO Drive Level
5.0 dB Conversion Gain
100% On-Wafer RF and DC Testing
100% Visual Inspection to MIL-STD-883 Method 2010
General Description
Mimix Broadbands 32.0-45.0 GHz GaAs MMIC transmitter has a
+14.0 dBm output third order intercept across the band.This
device is a balanced, resistive pHEMT mixer followed by a
distributed output amplifier and includes an integrated LO
doubler and LO buffer amplifier.The use of integrated LO
doubler and LO buffer amplifier makes the provision of the LO
easier than for fundamental mixers at these frequencies. IF and
IF mixer inputs are provided and an external 180 degree hybrid
is required to select the desired sideband.This MMIC uses
Mimix Broadbands 0.15 µm GaAs PHEMT device model
technology, and is based upon electron beam lithography to
ensure high repeatability and uniformity.The chip has surface
passivation to protect and provide a rugged part with backside
via holes and gold metallization to allow either a conductive
epoxy or eutectic solder die attach process.This device is well
suited for Millimeter-wave Point-to-Point Radio, LMDS, SATCOM
and VSAT applications.
Chip Device Layout
U1004
Absolute Maximum Ratings
Supply Voltage (Vd)
Supply Current (Id1,Id2)
Gate Bias Voltage (Vg)
Input Power (IF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
+6.0 VDC
200, 180 mA
+0.3 VDC
0.0 dBm
-65 to +165 OC
-55 to MTTF Table3
MTTF Table3
(3) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25o C)
Parameter
Units Min. Typ. Max.
Frequency Range (RF) Upper Side Band
GHz 35.0 - 45.0
Frequency Range (RF) Lower Side Band
GHz 32.0 - 42.0
Frequency Range (LO)
GHz 16.0 - 25.0
Frequency Range (IF)
GHz DC - 4.0
Output Return Loss RF (S22)
Small Signal Conversion Gain IF/RF (S21) 2
dB - 10.0 -
dB - 5.0 -
LO Input Drive (PLO)
Isolation LO/RF @ LOx1
dBm - +4.0 -
dB - TBD -
Isolation LO/RF @ LOx2
Output Third Order Intercept (OIP3) 1,2
dB - TBD -
dBm - +14.0 -
Drain Bias Voltage (Vd1,2)
VDC - +4.0 +5.5
Gate Bias Voltage (Vg1,2)
VDC -1.2 -0.3 +0.1
Gate Bias Voltage (Vg3,4) Mixer, Doubler
VDC -1.2 -0.5 +0.1
Supply Current (Id1) (Vd1=4.0V, Vg=-0.3V Typical)
mA - 160 180
Supply Current (Id2) (Vd2=4.0V, Vg=-0.3V Typical)
(1) Measured using constant current.
(2) Measured using LO Input drive level of 0.0 dBm.
mA - 145 165
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 7
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.


XU1004 Datasheet
Recommendation XU1004 Datasheet
Part XU1004
Description GaAs MMIC Transmitter
Feature XU1004; 32.0-45.0 GHz GaAs MMIC Transmitter August 2006 - Rev 02-Aug-06 Features Sub-harmonic Transmitter I.
Manufacture Mimix Broadband
Datasheet
Download XU1004 Datasheet




Mimix Broadband XU1004
32.0-45.0 GHz GaAs MMIC
Transmitter
August 2006 - Rev 02-Aug-06
Transmitter Measurements
XU1004 Vd1,2=4.0 V, Id1=160 mA, Id2=145 mA, USB
LO=+0.0 dBm, IF=2.0 GHz @ -15.0 dBm, ~1310 Devices
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
30.0 31.0 32.0 33.0 34.0 35.0 36.0 37.0 38.0 39.0 40.0 41.0 42.0 43.0 44.0 45.0
RF Frequency (GHz)
Max Median Mean -3sigma
U1004
XU1004 Vd1,2=4.0 V, Id1=160 mA, Id2=145 mA, LSB
LO=+0.0 dBm, IF=2.0 GHz @ -15.0 dBm, ~1310 Devices
10
9
8
7
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
30.0 31.0 32.0 33.0 34.0 35.0 36.0 37.0 38.0 39.0 40.0 41.0 42.0 43.0 44.0 45.0
RF Frequency (GHz)
Max Median Mean -3sigma
XU1004 Vd1,2=4.0 V, Id1=160 mA, Id2=145 mA, USB/LSB
LO=+0.0 dBm, IF=2.0 GHz @ -15.0 dBm, ~1680 Devices
0
-5
-10
-15
-20
-25
-30
30.0 31.0 32.0 33.0 34.0 35.0 36.0 37.0 38.0 39.0 40.0 41.0 42.0 43.0 44.0 45.0
RF Frequency (GHz)
Max Median Mean -3sigma
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 7
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.



Mimix Broadband XU1004
32.0-45.0 GHz GaAs MMIC
Transmitter
August 2006 - Rev 02-Aug-06
Mechanical Drawing
0.921
(0.036)
1.620
(0.064)
2
1.621
(0.064)
3
2.220
(0.087)
4
U1004
5
0.646
(0.025)
0.295
(0.012)
0.0
1
0.0
10
0.921
(0.036)
98
1.621
2.021
(0.064) (0.080)
76
2.421 2.821
(0.095) (0.111)
3.970
(0.156)
(Note: Engineering designator is 40TX0531)
Units: millimeters (inches) Bond pad dimensions are shown to center of bond pad.
Thickness: 0.110 +/- 0.013 (0.0043 +/- 0.0004), Backside is ground, Bond Pad/Backside Metallization: Gold
All DC/IF Bond Pads are 0.100 x 0.100 (0.004 x 0.004). All RF Bond Pads are 0.100 x 0.200 (0.004 x 0.008)
Bond pad centers are approximately 0.109 (0.004) from the edge of the chip.
Dicing tolerance: +/- 0.005 (+/- 0.0002). Approximate weight: 3.987 mg.
Bond Pad #1 (RF Out) Bond Pad #3 (IF1) Bond Pad #5 (LO) Bond Pad #7 (Vg2) Bond Pad #7 (IF2)
Bond Pad #2 (Vd1) Bond Pad #4 (Vd2) Bond Pad #6 (Vg4) Bond Pad #8 (Vg3) Bond Pad #8 (Vg1)
Bias Arrangement
Vd1
IF1
23
4
Vd2
Bypass Capacitors - See App Note [2]
Vd1 Vd2
IF1
RF 1
Vg1
10
Vg3
9
IF2
8
76
Vg2
5 LO
RF
Vg4
LO
Vg4
IF2
Vg1 Vg3 Vg2
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 7
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)