Current Transducer
Current Transducer LTC 1000-SF
For the electronic measurement of currents : DC, AC, pulsed..., with a galvanic isolation...
Description
Current Transducer LTC 1000-SF
For the electronic measurement of currents : DC, AC, pulsed..., with a galvanic isolation between the primary circuit (high power) and the secondary circuit (electronic circuit).
IPN =
1000 A
Electrical data
IPN IP ÎP RM Primary nominal r.m.s. current Primary current, measuring range @ 24 V Max overload not measurable Measuring resistance with ± 15 V with ± 24 V ISN KN VC IC Vd
www.DataSheet4U.com
1000 A 0 .. ± 2400 1) A 10 / 10 kA/ms RM min RM max 0 0 0 0 15 7 50 7 Ω Ω Ω Ω mA V mA kV kV kV
Features
Closed loop (compensated) current
transducer using the Hall effect
@ ± 1000 A max @ ± 1200 A max @ ± 1000 A max @ ± 2000 A max
Insulated plastic case recognized
according to UL 94-V0
Transducer delivered with feet Railway equipment.
Secondary nominal r.m.s. current Conversion ratio Supply voltage (± 5 %) Current consumption R.m.s. voltage for AC isolation test, 50 Hz, 1 mn R.m.s. voltage for partial discharge extinction
Ve
200 1 : 5000 ± 15 .. 24 < 30 (@±24V) +IS 13.4 2) 1.5 3) > 2.8 4)
Advantages
Excellent accuracy Very good linearity Low temperature drift Optimized response time Wide frequency bandwidth No insertion losses High immunity to external interference Current overload capability.
Accuracy - Dynamic performance data
XG Overall accuracy @ IPN , TA = 25°C @ IPN , TA = - 40°C .. + 85°C Linearity Offset current @ IP = 0, TA = 25°C Thermal drift of IO Response time 5) @ 90 % of IPN di/dt accurately followed ...
Similar Datasheet