LTC600-SFC

Current Transducer LTC 600-SFC For the electronic measurement of currents : DC, AC, pulsed..., with a galvanic isolation between the primary circuit (high power) and the secondary circuit (electronic circuit). IPN = 500 A Electrical data IPN IP ÎP RM Primary nominal r.m.s. current Primary current, measuring range @ 24 V Max overload not measurable Measuring resistance with ± 15 V with ± 24 V ISN KN VC IC Vd www.DataSheet4U.com 500 A 0 .. ± 1500 A 10 / 10 kA/ms RM min RM max 0 0 0 0 70 5 150 20 Ω Ω Ω Ω mA V mA kV kV kV Features Closed loop (compensated) current transducer using the Hall effect @ ± 500 A max @ ± 1200 A max @ ± 500 A max @ ± 1500 A max Insulated plastic case recognized according to UL 94-V0 Transducer delivered with feet and clamps Secondary nominal r.m.s. current Conversion ratio Supply voltage (± 5 %) Current consumption R.m.s. voltage for AC isolation test, 50 Hz, 1 mn R.m.s. voltage for partial discharge extinction Ve 100 1 : 5000 ± 15 .. 24 < 30 (@±24V) +IS 13.4 1) 1.5 2) > 2.8 3) Railway equipment. Advantages Excellent accuracy Very good linearity Low temperature drift Optimized response time Wide frequency bandwidth No insertion losses High immunity to external interference Current overload capability. Accuracy - Dynamic performance data XG Overall accuracy @ IPN , TA = 25°C @ IPN , TA = - 40°C .. + 85°C Linearity Offset current @ IP = 0, TA = 25°C Thermal drift of IO Response time 4) @ 90 % of IPN di/dt accurately fo...