Document
Preliminary Data Sheet I2142 rev. A 03/99
SAFEIR Series 10ETS..FP
INPUT RECTIFIER DIODE TO-220 FULLPAK
Description/Features
The 10ETS..FP rectifier SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150°C junction temperature. Typical applications are in input rectification and these products are designed to be used with International Rectifier Switches and Output Rectifiers which are available in identical package outlines. Fully isolated package (VINS = 2500 VRMS ). UL E78996 approved
VF
< 1.1V @ 10A
IFSM = 200A VRRM 800 to 1600V
www.DataSheet4U.com
Output Current in Typical Applications Applications
Capacitive input filter TA = 55°C, TJ = 125°C common heatsink of 1°C/ W
Single-phase Bridge
12.0
Three-phase Bridge
16.0
Units
A
Major Ratings and Characteristics Characteristics
IF(AV) Sinusoidal waveform VRRM IFSM VF TJ @ 10 A, TJ = 25°C
Package Outline
10ETS..FP Units
10 800 to 1600 200 1.1 - 40 to 150 A V A V °C
TO-220AC FULLPAK
www.irf.com
1
10ETS..FP SAFEIR Series
Preliminary Data Sheet I2142 rev. A 03/99
Voltage Ratings
Part Number VRRM , maximum peak reverse voltage V
10ETS08FP 10ETS12FP 10ETS16FP 800 1200 1600
VRSM , maximum non repetitive peak reverse voltage V
900 1300 1700
I RRM 150°C mA
0.5
Provide terminal coating for voltages above 1200V
Absolute Maximum Ratings
Parameters
IF(AV) Max. Average Forward Current IFSM I2t Max. Peak One Cycle Non-Repetitive Surge Current Max. I2 t for fusing
10ETS..FP Units
10 170 A 200 130 145 A2s A √s
2
Conditions
@ TC = 105° C, 180° conduction half sine wave 10ms Sine pulse, rated VRRMapplied 10ms Sine pulse, no voltage reapplied 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied t = 0.1 to 10ms, no voltage reapplied
A
I √t
2
Max. I √t for fusing
2
1450
Electrical Specifications
Parameters
V FM Max. Forward Voltage Drop rt Forward slope resistance
10ETS..FP Units
1.1 20 0.82 0.05 0.50 V mΩ V mA
Conditions
@ 10A, TJ = 25°C TJ = 150°C TJ = 25 °C TJ = 150 °C
VF(TO) Threshold voltage I RM Max. Reverse Leakage Current
VR = rated VRRM
Thermal-Mechanical Specifications
Parameters
TJ T stg Max. Junction Temperature Range Max. Storage Temperature Range
10ETS..FP Units
- 40 to 150 - 40 to 150 2.5 62 0.5 2(0.07) Min. Max. 6 (5) 12 (10) °C °C °C/W °C/W °C/W g (oz.) Kg-cm (Ibf-in)
Conditions
R thJC Max. Thermal Resistance Junction to Case R thJA Max. Thermal Resistance Junction to Ambient R thCS Typical Thermal Resistance, Case to Heatsink wt T Approximate Weight Mounting Torque Case Style
DC operation
Mounting surface , smooth and greased
TO-220 FULLPAK
(94/V0)
2
www.irf.com
10ETS..FP SAFEIR Series
Preliminary Data Sheet I2142 rev. A 03/99
Maximum Allowable Case Temperat ure ( °C)
Maximum Allowable Case Temperature (°C) 150 140 130
Conduction Angle
150 140 130
Conduction Period
10ETS.. Series R thJC(DC) = 2.5 °C/W
10ETS.. Series R thJC (DC) = 2.5 °C/W
120 110 100 90 80
0 2 4 6 8 10 12 Average Forward Current (A) 30° 60° 90°
120 110 100 90 0 2 4 6 8 10 12 14 16 18 Average Forward Current (A)
30° 60° 90° 120° 180° DC
120°
180°
Fig. 1 - Current Rating Characteristics
16 14 12 10 RMS Limit 8 6 4 2 0 0 2 4 6 8 10 Average Forward Current (A)
Conduction Angle
Fig. 2 - Current Rating Characteristics
Maximum Average Forward Power Loss (W) 20 18 16 14 12 10 8 6 4 2 0 0 2 4 6 8 10 12 14 16 Average Forward Current (A) RMS Limit
Conduction Period
Maximum Average Forward Power Loss (W)
180° 120° 90° 60° 30°
DC 180 ° 120° 90° 60° 30°
10ETS.. Series T J = 150°C
10ETS.. Series T = 150°C
J
Fig. 3 - Forward Power Loss Characteristics
Peak Half Sine Wave Forward Current (A)
Fig. 4 - Forward Power Loss Characteristics
240 220
Peak Half Sine Wave Forward Current (A)
200 180 160 140 120 100 80 60 40 1
At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial T J = 150°C
@ 60 Hz 0.0083 s @ 50 Hz 0.0100 s
Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T J = 150 °C 200 No Voltage Reapplied Rated VRRM Reapplied 180
160 140 120 100 80 60 40 0.01 10ETS.. Series
10ETS.. Series
10
100
0.1
Pulse Train Duration (s)
1
Number Of Equal Amplitude Half Cycle Current Pulses (N)
Fig. 5 - Maximum Non-Repetitive Surge Current
Fig. 6 - Maximum Non-Repetitive Surge Current
www.irf.com
3
10ETS..FP SAFEIR Series
Preliminary Data Sheet I2142 rev. A 03/99
100 Instantaneous Forward Current (A) T J= 25°C
T J= 150°C
10
10ETS.. Series
1
0
0.5
1
1.5
2
2.5
3
Instantaneous Forward Voltage (V)
Fig. 8 - Forward Voltage Drop Characteristics
Transient Thermal Impedance Z thJC (°C/W) 10 D= D= D= D= D= 0.50 0.33 0.25 0.17 0.08 Steady State Value (DC Operation)
1
Single Pulse
10ETS.. Series
0.1 0.0001
0.001
0.01
0.1
1
10
Square Wave Pulse Duration (s)
Fig. 9 - Thermal Impedance ZthJC Characteristics
4
www.irf.com
10ETS..FP SAFEIR Series
Preliminary Data Sh.