M3R

M3R Series 9x14 mm, 3.3 Volt, HCMOS/TTL, Clock Oscillator M3R Series 9x14 mm, 3.3 Volt, HCMOS/TTL, Clock Oscillator M3R Series 9x14 mm, 3.3 Volt, HCMOS/TTL, Clock Oscillator Pin Connections Pin Connections Pin Connections www.DataSheet4U.com NOTE: A capacitor of value 0.01 µF or greater between Vdd and Ground is recommended. NOTE: A capacitor of value NOTE: of value 0.01 0.01 mA Fcapacitor or greater between Vdd µ F or greater between and and Ground is Vdd recommended. Ground is recommended. 1. See load circuit diagram #2 on page 116. 2. Rise/Fall times are measured between 10% Vdd and 90% Vdd with HCMOS load. 3. TTL output drive capability is 2 TTL (10 LS - TTL). MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Rise/Fall times are measured between 10% VddContact and 90% us Vdd with HCMOS load. Please see www.mtronpti.com for our2. complete and detailed datasheets. for your application specific requirements: MtronPTI MtronPTI reserves the right to make changes to offering the product(s) and service(s) described herein without notice. No liability is assumed as a result of their1-800-762-8800. use or application. 3. TTL output drive capability is 2 TTL (10 LS - TTL). 1. See load circuit diagram #2 on page 116. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein 94 without notice. No liability is assumed a...