(HI-8570 / HI-8571) ARINC 429 LINE DRIVER
HI-8570, HI-8571
August 2006
+/- 5V Supply, ARINC 429 LINE DRIVER
PIN CONFIGURATION
SLP1.5 1 TX0IN 2 TX1IN 3 GND 4
DES...
Description
HI-8570, HI-8571
August 2006
+/- 5V Supply, ARINC 429 LINE DRIVER
PIN CONFIGURATION
SLP1.5 1 TX0IN 2 TX1IN 3 GND 4
DESCRIPTION
The HI-8570 and HI-8571 are CMOS integrated circuits designed to directly drive the ARINC 429 bus in an 8-pin package. Two logic inputs control a differential voltage between the output pins producing a +10 volt One, a -10 volt Zero, and a 0 volt Null. A logic input is provided to control the slope of the differential output signal. Timing is set by an on-chip resistor and capacitor and tested to be within ARINC requirements. The HI-8570 has 37.5 ohms in series with each line driver output. The HI-8571 provides the option to bypass part of the output resistance so external resistance may be added for lightning protection circuits. The HI-8570 or the HI-8571 along with the HI-8588 line receiver offer the smallest options available to get on and off theARINC 429 bus.
www.DataSheet4U.com
8 V+ 7 TXBOUT 6 TXAOUT 5 V-
SUPPLY VOLTAGES
V+ = +5V V- = -5V
FUNCTION TABLE
TX1IN TX0IN SLP1.5 TXAOUT 0V -5V -5V 5V 5V 0V TXBOUT 0V 5V 5V -5V -5V 0V SLOPE N/A 10ms 1.5ms 10ms 1.5ms N/A 0 0 0 0 1 1 0 0 1 X 0 1 0 1 X
FEATURES
! ! ! ! ! ! !
Direct ARINC 429 line driver interface in a small package On-chip line driver slope control and selection by logic input Low current 5 volt supplies CMOS / TTL logic pins
1 1 1
PIN DESCRIPTION TABLE
PIN SYMBOL SLP 1.5 TX0IN TX1IN GND VTXAOUT TXBOUT V+ FUNCTION LOGIC INPUT LOGIC INPUT LOGIC INPUT POWER POWER OUTPUT OUTPUT POWER...
Similar Datasheet