PI3HDMI411AD

PI3HDMI411AD DVI / HDMI Re-Driver w/ Equalization, De-emphasis & Pre-emphasis Features Supply voltage, VDD = 3.3V ±5% Compatible with DVI, HDMI, rev 1.1, 1.2, and 1.3 signals Supports both AC-coupled and DC-coupled inputs 8-Bit, 10-Bit, and 12-Bit deep color support Configurable output swing control (500mV,750mV,1000mV) Configurable Pre-Emphasis levels (0dB, 1.5dB, 3.5dB, & 6.0dB) Configurable De-Emphasis (0dB, -1.5dB, -3.5dB, -6.0dB) Configurable Equalization (1dB, 3.5dB, 8dB, Optimized EQ) Data Rate = 2.5 Gbps (max) ESD protection = 6kV (Typical) Inputs w/ built-in termination per HDMI spec Propogation delay < 2ns input Uni-Directional Packaging (Pb-free & Green): 56-contact TQFN (ZB56) Description Pericom Semiconductor’s PI3HDMI411AD, active-drive switch solution is targeted for high-resolution video networks that are based on DVI/HDMI standards, and TMDS signal processing. The PI3HDMI411AD is an active single TMDS channel re-driver with Hi-Z outputs. The device drives differential signals with enhanced signal integrity to video display units. It provides three controllable output swing levels that can be controlled through pin control or I2C control, depending on the mode select pin. The swing levels are 500mV, 700mV, & 1000mV. This solution also provides a unique advanced pre-emphasis technique to increase rise and fall times which are reduced during transmission across long distances. The maximum DVI/HDMI data rate of 2.5Gbps provides a 1920x108...