NLAS4501

NLAS4501 Single SPST Analog Switch The NLAS4501 is an analog switch manufactured in sub-micron silicon-gate CMOS technology. It achieves very low RON while maintaining extremely low power dissipation. The device is a bilateral switch suitable for switching either analog or digital signals, which may vary from zero to full supply voltage. The NLAS4501 is pin-for-pin compatible with the MAX4501. The NLAS4501 can be used as a direct replacement for the MAX4501 in all 2.0 V to 5.5 V applications where a RON performance improvement is required. The Enable pin is compatible with standard CMOS outputs when supply voltage is nominal 5.0 Volts. It is also over-voltage tolerant, making it a very useful logic level translator. ăGuaranteed RON of 32 W at 5.5 V ăLow Power Dissipation: ICC = 2 mA ăProvides Voltage translation for many different voltage levels 3.3 to 5.0 V, Enable pin may go as high as +5.5 Volts 1.8 to 3.3 V 1.8 to 2.5 V ăImproved version of MAX4501 (at any voltage between 2 and 5.5 Volts) ăChip Complexity: FETs 11 ăPb-Free Packages are Available http://onsemi.com MARKING DIAGRAMS A2d SC70-5/SC-88A/SOT-353 DF SUFFIX CASE 419A 5 1 SOT23-5/TSOP-5/SC59-5 DT SUFFIX CASE 483 5 A2d 1 d = Date Code COM 1 NO 2 GND 3 5 VCC 4 ENABLE Figure 1. Pinout (Top View) PIN ASSIGNMENT 1 COM 2 NO 3 GND 4 ENABLE 5 VCC FUNCTION TABLE On/Off Enable Input L H State of Analog Switch Off On ORDERING INFORMATION See detailed ordering and shipping information on page 7 of ...