Triple Channel Video Reconstruction Filter
19-3269; Rev 0; 6/05
Triple-Channel Video Reconstruction Filter and Buffer for Composite and Y/C Outputs
General Descri...
Description
19-3269; Rev 0; 6/05
Triple-Channel Video Reconstruction Filter and Buffer for Composite and Y/C Outputs
General Description
The MAX7453 is a low-cost, triple-channel video reconstruction filter for S-video and CVBS video-signal applications. This device is ideal for anti-aliasing and DAC smoothing video applications such as set-top boxes, DVD players, hard-disk recorders (HDRs), and personal video recorders. This filter operates from a single +5V supply. It is optimized for NTSC, PAL, and standard-definition TV (SDTV) video systems. Each channel consists of a lowpass filter and an output buffer capable of driving one (YOUT, COUT) or two (CVOUT) standard 150Ω video loads. The output buffers can drive either an AC or a DC load such that the blanking level voltage after the backmatch resistor is less than 1V. The Y and C video inputs are summed to produce the composite video output. The MAX7453 has a maximally flat frequency response. The MAX7453 is available in an 8-pin SO package and is fully specified over the commercial (0°C to +70°C) temperature range.
Features
♦ Triple-Channel Filter and Buffer for CVBS and Y/C (S-Video) Video Signals ♦ Filter Response Ideal for NTSC, PAL, and Interlaced SDTV Signals ♦ 42dB (typ) Stopband Attenuation at 27MHz ♦ -0.3dB (typ) Passband Response ♦ ♦ ♦ ♦ ♦ <1V Blanking Level Allows DC-Coupled Output CVOUT Drives Two 150Ω Video Loads YOUT and COUT Drive One 150Ω Video Load +5V Single-Supply Voltage 8-Pin SO Package
MAX7453
Ordering Informat...
Similar Datasheet