EAM/DFB-LD MODULE. FU-632SEA-V61MxxF Datasheet

FU-632SEA-V61MxxF Datasheet PDF, Equivalent


Part Number

FU-632SEA-V61MxxF

Description

EAM/DFB-LD MODULE

Manufacture

Mitsubishi Electric

Total Page 6 Pages
PDF Download
Download FU-632SEA-V61MxxF Datasheet


FU-632SEA-V61MxxF Datasheet
MAY06 (1/6)
MITSUBISHI (OPTICAL DEVICES)
FU-632SEA-x61MyyF
1.55 μm EAM/DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL
DESCRIPTION
Module type FU-632SEA-x61MyyF is an electro-aborption
modulator integrated with 1.55μm DFB-LD module with
single mode optical fiber.
This module is suitable to a light source in 2.5Gb/s digital
optical communication systems where the distance is
more than 640km.
This module is prepared in accordance with ITU-T
recommendation wavelength channel plan for Dense-
WDM transmission.
FEATURES
Input impedance is 50Ω
Electroabsorption Modulator integrated Multi quantum
wells (MQW) DFB Laser Diode
Emission wavelength is in full C band
Single mode optical fiber pig-tail
Built-in optical isolator
Built-in thermal electric cooler
Butterfly package
With photodiode for optical output monitor
RoHS (2002/95/EC) complian
www.DataSheet4U.com
APPLICATION
High speed transmission systems (~2.5Gb/s)
Long haul transmission systems (12800ps/nm)
Dense-WDM systems
ABSOLUTE MAXIMUM RATINGS (Tld=Tset)
Parameter
Symbol
Conditions
Rating
Unit
Laser diode
Optical output power
Pf
CW
6 mW
Forward current
If CW
200 mA
Reverse voltage Vrl CW
2V
Modulator
Reverse voltage
Vrm
-
5V
Forward voltage
Vfm
-
1V
Photodiode for
Reverse voltage
Vrd
-
20 V
monitoring
Forward current
Ifd
-
2 mA
Thermoelectric
Current
Ipe -
1.5 A
cooler(Note 1)
Voltage
Vpe -
3V
Operating case temperature
Tc
-
-20 to 70
°C
Storage temperature
Tstg -
-40 to 85
°C
Note 1. Even if the thermoelectric cooler(TEC) is operated within the rated conditions, uncontrolled current loading or
operation without heat sink may easily damage the module by exceeding the storage temperature range.
Thermistor resistance should be properly monitored by the feedback circuit during TEC operation to avoid
the catastrophic damage.
Mitsubishi Electric Corporation reserves the right to make changes to the products or information contained herein
without notice. No liability is assumed as a result of their use or application.
MITSUBISHI CONFIDENTIAL

FU-632SEA-V61MxxF Datasheet
MAY06 (2/6)
MITSUBISHI (OPTICAL DEVICES)
FU-632SEA-x61MyyF
1.55 μm EAM/DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL
ELECTRICAL/OPTICAL CHARACTERISTICS (Tld=Tset, Tc=-20~70°C unless otherwise noted)
Parameter
Symbol
Test Conditions
Limits
(Note 2)
Min. Typ.
Laser operating Temperature Tset
CW, If=Iop
20 -
Max.
35
Unit
°C
Threshold current
Operating current
Ith CW,Vm=0V
Iop CW,Vm=0V
5 - 30 mA
40 60 70 mA
Operating voltage
Input impedance
Vop CW,Vm=0V,If=Iop
Zin If=Iop
- - 1.7 V
- 50 - Ω
Optical output power
from fiber end
Light emission central
spectral wavelength
Center wavelength drift with
case temperature
Side mode suppression ratio
Spectral width
Pf_ave
λc
Δλc/ΔTc
Sr
Δλcw
Δλmod
(Note3,4)
(Note3,4)
CW,Vm=0V,APC,
20~70°C
(Note3,4)
CW,Vm=0V,If=Iop
(Note3,4)
Tld=Tset
,Tc=-
-2 - +2.5 dBm
see Table 1.
nm
-1 - 0 pm/°C
35 40
- dB
- 3 10 MHz
- 0.05 0.1 nm
Relative intensity noise
Power penalty
Extinction ratio
Rise/Fall time
RIN CW,Vm=0V,If=Iop,2.5GHz
Pp (Note3,4), 12800ps/nm
Ex (Note3,4)
tr/tf (Note3,4),20-80%
- -155 -140 dB/Hz
- - 1.5 dB
11 -
- dB
- - 100 ps
Cutoff frequency
RF return loss
Tracking error
Monitor current
Dark current(PD)
Capacitance(PD)
Optical isolation
fc If=Iop,Vm=-1V
3.5 -
- GHz
S11 If=Iop,Vm=-1V,0~2GHz
If=Iop,Vm=-1V,2~3GHz
10 -
7-
- dB
- dB
Er
Tc=-20~70°C,APC, ATC (Note -
0.3 0.5 dB
5),Vm=0V
Imon (Note3,4)
0.1 - 1.5 mA
Id Vrd=5V,Tld=25°C
- - 0.1 μA
Ct Vrd=5V,Tld=25°C,f = 1MHz
- 10 - pF
Iso Tc=25°C
35 -
- dB
Tc=-20~70°C
23 -
- dB
Note2) Vm is EAM bias level at CW condition, Vpp and Voff are EAM amplitude and EAM high level offset voltage
respectively at modulated condition.
Note 3) 2.48832Gb/s,NRZ,PRBS223-1,If=Iop,Vpp=2.5V,Voff= -0.2V,Tld=Tset, Back to back.
Note 4) Optical return loss of the connectors should be greater than 40dB in order to get specified performance.
Note 5) Er=MAX|10×log(Pf(Tc)/Pf(25°C))|
input
voltage
0V
Voff
Vpp
time
fig1. Definition of Electrical input
Mitsubishi Electric Corporation reserves the right to make changes to the products or information contained herein
without notice. No liability is assumed as a result of their use or application.
MITSUBISHI CONFIDENTIAL


Features Datasheet pdf MAY06 (1/6) MITSUBISHI (OPTICAL DEVICES) FU-632SEA-x61MyyF 1.55 μm EAM/DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL D ESCRIPTION Module type FU-632SEA-x61Myy F is an electro-aborption modulator int egrated with 1.55μm DFB-LD module with single mode optical fiber. This module is suitable to a light source in 2.5Gb /s digital optical communication system s where the distance is more than 640km . This module is prepared in accordance with ITU-T recommendation wavelength c hannel plan for DenseWDM transmission. FEATURES • Input impedance is 50Ω Electroabsorption Modulator integrat ed Multi quantum wells (MQW) DFB Laser Diode • Emission wavelength is in ful l C band • Single mode optical fiber pig-tail • Built-in optical isolator • Built-in thermal electric cooler Butterfly package • With photodiod e for optical output monitor • RoHS ( 2002/95/EC) compliant APPLICATION Hig h speed transmission systems (~2.5Gb/s) Long haul transmission systems (12800ps/nm) Dense-WDM systems www.DataSheet4U.com A.
Keywords FU-632SEA-V61MxxF, datasheet, pdf, Mitsubishi Electric, EAM/DFB-LD, MODULE, U-632SEA-V61MxxF, -632SEA-V61MxxF, 632SEA-V61MxxF, FU-632SEA-V61Mxx, FU-632SEA-V61Mx, FU-632SEA-V61M, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)