FU-68SDF-L3M1F

JAN06 (1/5) MITSUBISHI (OPTICAL DEVICES) FU-68SDF-x3MyF 1.5 μm DFB-LD MODULE WITH SINGLEMODE FIBER PIGTAIL DESCRIPTION Module type FU-68SDF-x3MyF is a 1.5μm band DFB-LD module with single-mode optical fiber. This module is suitable to a directly modulated light source for use in high power optical repieter for mobile communication system. FEATURES High liniality multi quantum wells (MQW) DFB-LD Emission wavelength is in 1.5μm band Built-in optical isolator Thermo electric cooler for laser temperature control With photodiode for optical output monitor RoHS (2002/95/EC) compliant APPLICATION Repeater systems Radio on fiber Analog transmission systems www.DataSheet4U.com ABSOLUTE MAXIMUM RATINGS (Tld=25°C) Parameter Symbol Conditions Rating Unit Laser diode Optical output Pf CW 15 mW power Forward current If CW 150 mA Reverse voltage Vrl 2 V Photodiode Reverse voltage Vrd 20 V Forward current Ifd 2 mA ThermoCooler current Ipe 1.3 A electric cooler Cooler voltage Vpe 3.1 V (Note) Operating case temperature Tc -20 ~ 70 °C Storage temperature Tstg -40 ~ 85 °C Note) Even if the thermo-electric cooler (TEC) is operated within the rated conditions, uncontrolled current loading or operation without heatsink may easily damage the module by exceeding the storage temperature range. Thermistor resistance should be properly monitored by the feedback circuit during TEC operation to avoid the catastrophic damage. Mitsubishi Electric Corporation reserves the right to make cha...