DDU11H

DDU11H 5-TAP, ECL-INTERFACED FIXED DELAY LINE (SERIES DDU11H) FEATURES Five equally spaced outputs Fits standard 16-pin DIP socket Auto-insertable Input & outputs fully 10KH-ECL interfaced & buffered GND T2 T4 IN 1 3 4 5 16 15 14 13 T1 T3 T5 data 3 ® delay devices, inc. PACKAGES GND GND N/C T2 T4 IN N/C N/C VEE 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 GND T1 T3 T5 N/C N/C N/C N/C VEE 8 DDU11H-xx DIP DDU11H-xxM Military DIP DDU11H-xxC3 SMD DDU11H-xxMC3 Mil SMD FUNCTIONAL DESCRIPTION PIN DESCRIPTIONS www.DataSheet4U.com IN Signal Input The DDU11H-series device is a 5-tap digitally buffered delay line. The T1-T5 Tap Outputs signal input (IN) is reproduced at the outputs (T1-T5), shifted in time by an VEE -5 Volts amount determined by the device dash number (See Table). For dash GND Ground numbers less than 10, the total delay of the line is measured from T1 to T5. The nominal tap-to-tap delay increment is given by one-fourth of the total delay, and the inherent delay from IN to T1 is nominally 1.5ns. For dash numbers greater than or equal to 10, the total delay of the line is measured from IN to T5. The nominal tap-to-tap delay increment is given by one-fifth of this number. SERIES SPECIFICATIONS Minimum input pulse width: 20% of total delay Output rise time: 2ns typical Supply voltage: -5VDC ± 5% Power dissipation: 200mw typical (no load) Operating temperature: -30° to 85° C Temp. coefficient of total delay: 100 PPM/°C DASH NUMBER SPECIFICATION...