DatasheetsPDF.com

MC13192 Dataheets PDF



Part Number MC13192
Manufacturers Freescale Semiconductor
Logo Freescale Semiconductor
Description 2.4 GHz Low Power Transceiver
Datasheet MC13192 DatasheetMC13192 Datasheet (PDF)

Freescale Semiconductor Technical Data Document Number: MC13192 Rev. 2.9, 08/2005 MC13192/MC13193 (Scale 1:1) MC13192/MC13193 2.4 GHz Low Power Transceiver for the IEEE® 802.15.4 Standard Device MC13192 MC13193 Package Information Plastic Package Case 1311-03 (QFN-32) Ordering Information Device Marking 13192 13193 Package QFN-32 QFN-32 1 Introduction Contents 1 2 3 4 5 6 7 8 9 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . .

  MC13192   MC13192


Document
Freescale Semiconductor Technical Data Document Number: MC13192 Rev. 2.9, 08/2005 MC13192/MC13193 (Scale 1:1) MC13192/MC13193 2.4 GHz Low Power Transceiver for the IEEE® 802.15.4 Standard Device MC13192 MC13193 Package Information Plastic Package Case 1311-03 (QFN-32) Ordering Information Device Marking 13192 13193 Package QFN-32 QFN-32 1 Introduction Contents 1 2 3 4 5 6 7 8 9 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Block Diagrams . . . . . . . . . . . . . . . . . . . . . . . 3 Data Transfer Modes . . . . . . . . . . . . . . . . . . . 3 Electrical Characteristics . . . . . . . . . . . . . . . 8 Functional Description . . . . . . . . . . . . . . . . 12 Pin Connections . . . . . . . . . . . . . . . . . . . . . . 15 Applications Information . . . . . . . . . . . . . . . 18 Packaging Information . . . . . . . . . . . . . . . . . 23 www.DataSheet4U.com The MC13192 and MC13193 are short range, low power, 2.4 GHz Industrial, Scientific, and Medical (ISM) band transceivers. The MC13192/MC13193 contain a complete 802.15.4 physical layer (PHY) modem designed for the IEEE® 802.15.4 wireless standard which supports peer-to-peer, star, and mesh networking. The MC13192 includes the 802.15.4 PHY/MAC for use with the HCS08 Family of MCUs. The MC13193 also includes the 802.15.4 PHY/MAC plus the ZigBee Protocol Stack for use with the HCS08 Family of MCUs. With the exception of the addition of the ZigBee Protocol Stack, the MC13193 functionality is the same as the MC13192. When combined with an appropriate microcontroller (MCU), the MC13192/MC13193 provide a cost-effective solution for short-range data links and networks. Interface with the MCU is accomplished using a four wire serial peripheral interface (SPI) connection and an interrupt request output which allows for the use of a variety of processors. The software and processor Freescale reserves the right to change the detail specifications as may be required to permit improvements in the design of its products. © Freescale Semiconductor, Inc., 2004, 2005. All rights reserved. Features can be scaled to fit applications ranging from simple point-to-point systems, through complete ZigBee™ networking. For more detailed information about MC13192/MC13192 operation, refer to the MC13192/MC13193 Reference Manual, part number MC13192RM. Applications include, but are not limited to, the following: • Remote control and wire replacement in industrial systems such as wireless sensor networks • Factory automation and motor control • Energy Management (lighting, HVAC, etc.) • Asset tracking and monitoring Potential consumer applications include: • Home automation and control (lighting, thermostats, etc.) • Human interface devices (keyboard, mice, etc.) • Remote entertainment control • Wireless toys The transceiver includes a low noise amplifier, 1.0 mW power amplifier (PA), voltage controlled oscillator (VCO), on-board power supply regulation, and full spread-spectrum encoding and decoding. The device supports 250 kbps Offset-Quadrature Phase Shift Keying (O-QPSK) data in 2.0 MHz channels with 5.0 MHz channel spacing per the IEEE 802.15.4 specification. The SPI port and interrupt request output are used for receive (RX) and transmit (TX) data transfer and control. 2 • • • • • • Features Recommended power supply range: 2.0 to 3.4 V 16 Channels 0 dBm nominal, programmable from -27 dBm to 4 dBm typical maximum output power Buffered transmit and receive data packets for simplified use with low cost MCUs Supports 250 kbps O-QPSK data in 5.0 MHz channels and full spread-spectrum encode and decode (compatible with IEEE Standard 802.15.4) Three power down modes for power conservation: — < 1 µA Off current — 1 µA Typical Hibernate current — 35 µA Typical Doze current (no CLKO) RX sensitivity of -92 dBm (typical) at 1.0% packet error rate Four internal timer comparators available to reduce MCU resource requirements Programmable frequency clock output for use by MCU Onboard trim capability for 16 MHz crystal reference oscillator eliminates need for external variable capacitors and allows for automated production frequency calibration. Seven general purpose input/output (GPIO) signals MC13192/MC13193 Technical Data, Rev. 2.9 • • • • • 2 Freescale Semiconductor Block Diagrams • • Operating temperature range: -40 °C to 85 °C Small form factor QFN-32 Package — RoHS compliant — Meets moisture sensitivity level (MSL) 3 — 260 °C peak reflow temperature — Meets lead-free requirements 3 Block Diagrams Figure 3 shows a simplified block diagram of the MC13192/MC13193 which is an IEEE Standard 802.15.4 compatible transceiver that provides the functions required in the physical layer (PHY) specification. Figure 4 shows the basic system block diagram for the MC13192/MC13193 in an application. Interface with the transceiver is accomplished through a 4-wire SPI port and interrupt request line. .


MC13191 MC13192 MC13193


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)