SUBMINIATURE SOLID STATE LAMP
SUBMINIATURE SOLID STATE LAMP
Part Number: AM2520CGCK09 Green
Features
SUBMINIA TURE PACKAGE. WIDE VIEWING ANGLE. Z-BEN...
Description
SUBMINIATURE SOLID STATE LAMP
Part Number: AM2520CGCK09 Green
Features
SUBMINIA TURE PACKAGE. WIDE VIEWING ANGLE. Z-BEND LEAD. LONG LIFE - SOLID STATE RELIABILITY. LOW PACKAGE PROFILE. MOISTURE SENSITIVITY LEVEL : LEVEL 3. PACKAGE : 1000PCS / REEL. RoHS COMPLIANT.
Description
The Green source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode.
Package Dimensions
www.DataSheet4U.com
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. 5. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAC3400 APPROVED: WYNEC
REV NO: V.2 CHECKED: Allen Liu
DATE: MAY/08/2007 DRAWN: Y.L.LI
PAGE: 1 OF 5 ERP: 1202000450
Selection Guide
Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. AM2520CGCK09 Green (InGaAlP) WATER CLEAR 110 Typ. 400 Viewing Angle [1] 2<1/2 20°
Notes: 1. >1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol Epeak ED [1] JE1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Green Green Green Green Green Green Typ. 574 570 20 15 2.1 2.5 10 Max. Units nm nm nm pF V uA Test...
Similar Datasheet