SUBMINIATURE SOLID STATE LAMP
SUBMINIATURE SOLID STATE LAMP
Part Number: AM27SECK09 Super Bright Orange
Features
z SUBMINIATURE PACKAGE. z WIDE VIEWI...
Description
SUBMINIATURE SOLID STATE LAMP
Part Number: AM27SECK09 Super Bright Orange
Features
z SUBMINIATURE PACKAGE. z WIDE VIEWING ANGLE. z Z-BEND LEAD. z LONG LIFE - SOLID STATE RELIABILITY. z LOW PACKAGE PROFILE. z PACKAGE :1000PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT.
Description
The Super Bright Orange device is made with DH InGaAlP (on GaAs substrate) light emitting diode chip.
Package Dimensions
www.DataSheet4U.com
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. 5. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAD1331 APPROVED: WYNEC
REV NO: V.3 CHECKED: Allen Liu
DATE: MAY/08/2007 DRAWN: Y.L.LI
PAGE: 1 OF 5 ERP: 1202000336
Selection Guide
Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. AM27SECK09 Super Bright Orange (InGaAlP) WATER CLEAR 900 Typ. 1800 Viewing Angle [1] 2θ1/2 20°
Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Orange Super Bright Orange Super Brig...
Similar Datasheet