Document
Datasheet
Operational Amplifiers
SIGNATURE SERIES Operational Amplifiers
LM358xxx LM324xxx LM2904xxx LM2902xxx
General Description LM358xxx, LM324xxx, LM2904xxx, and LM2902xxx are monolithic IC’s which integrate two or four independent op-amps on a single chip and feature high gain, low power consumption, and an operating voltage range of 3V to 36V (single power supply).
Features Operable with a single power supply Wide operating supply voltage range Input and output are operable GND sense Low supply current High open loop voltage gain Wide temperature range
Application Current sense application Buffer application Active filter Consumer electronics
Key Specifications Operating Supply Voltage Single Supply Dual Supply Supply Current LM358xxx/LM324xxx LM2904xxx/LM2902xxx Input Bias Current Input Offset Current Operating Temperature Range LM358xxx/LM324xxx LM2904xxx/LM2902xxx
+3V to +36V ±1.5V to ±18V
0.7mA(Typ) 0.7mA(Typ)
20nA(Typ) 2nA(Typ)
-40°C to +85°C -40°C to +125°C
Packages SO Package8 SO Package14 TSSOP8 TSSOP14 Mini SO8
W(Typ) x D(Typ) x H(Max) 4.90mm x 6.0mm x 1.55mm 8.65mm x 6.0mm x 1.55mm 3.00mm x 6.4mm x 1.10mm 5.00mm x 6.4mm x 1.10mm 3.00mm x 4.9mm x 0.95mm
Pin Configuration
SO Package8 : LM358DT
(SOP-J8)
: LM358WDT
: LM2904DT
: LM2904WDT
TSSOP8
: LM358PT
(TSSOP-B8) : LM358WPT
: LM2904PT
: LM2904WPT
Mini SO8
: LM358ST
(TSSOP-B8J) : LM2904ST
OUTPUT 1 1 INVERTING INPUT 1 2
CH1
-+
8 Vcc+ 7 OUTPUT 2
NON-INVERTING INPUT 1 3 Vcc- 4
CH2
+-
6 INVERTING INPUT 2
5 NON-INVERTING INPUT 2
○Product structure:Silicon monolithic integrated circuit ○This product has no designed protection against radioactive rays.
www.rohm.com ©2015 ROHM Co., Ltd. All rights reserved. TSZ22111・14・001
1/35
TSZ02201-0RAR0G200520-1-2 15.Jun.2015 Rev.001
LM358xxx LM324xxx LM2904xxx LM2902xxx
Pin Description
Pin No.
Pin Name
1
OUTPUT 1
2
INVERTING INPUT 1
3
NON-INVERTING INPUT 1
4
Vcc-
5
NON-INVERTING INPUT 2
6
INVERTING INPUT 2
7
OUTPUT 2
8
Vcc+
SO Package14 : LM324DT
(SOP-J14)
: LM324WDT
: LM2902DT
: LM2902WDT
TSSOP14
: LM324PT
(TSSOP-B14J) : LM2902PT
Function CH1 OUTPUT CH1 INVERTING INPUT CH1 NON-INVERTING INPUT Negative power supply CH2 NON-INVERTING INPUT CH2 INVERTING INPUT CH2 OUTPUT Positive power supply
OUTPUT 1 1 INVERTING INPUT 1 2 NON-INVERTING INPUT 1 3
Vcc+ 4 NON-INVERTING INPUT 2 5
INVERTING INPUT 2 6 OUTPUT 2 7
CH1
-+ -+
CH2
CH4
+- +-
CH3
14 OUTPUT 4 13 INVERTING INPUT 4 12 NON-INVERTING INPUT 4 11 Vcc- 10 NON-INVERTING INPUT 3 9 INVERTING INPUT 3 8 OUTPUT 3
Pin Description Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14
Pin Name
OUTPUT1 INVERTING INPUT 1 NON-INVERTING INPUT 1 Vcc+ NON-INVERTING INPUT 2 INVERTING INPUT 2 OUTPUT 2 OUTPUT3 INVERTING INPUT 3 NON-INVERTING INPUT 3 Vcc- NON-INVERTING INPUT 4 INVERTING INPUT 4 OUTPUT 4
Function CH1 OUTPUT CH1 INVERTING INPUT CH1 NON-INVERTING INPUT Positive power supply CH2 NON-INVERTING INPUT CH2 INVERTING INPUT CH2 OUTPUT CH3 OUTPUT CH3 INVERTING INPUT CH3 NON-INVERTING INPUT Negative power supply CH4 NON-INVERTING INPUT CH4 INVERTING INPUT CH4 OUTPUT
Datasheet
www.rohm.com ©2015 ROHM Co., Ltd. All rights reserved. TSZ22111・15・001
2/35
TSZ02201-0RAR0G200520-1-2 15.Jun.2015 Rev.001
LM358xxx LM324xxx LM2904xxx LM2902xxx
Circuit Diagram
Vcc +
Datasheet
INVERTING INPUT
NON-INVERTING INPUT
OUTPUT
Vcc -
Figure 1 Circuit Diagram (each Op-Amp)
Absolute Maximum Ratings (Ta=25°C)
Parameter
Symbol
LM358xxx
Rating LM324xxx LM2904xxx
Unit LM2902xxx
Supply Voltage
Vcc+-Vcc-
+36
V
SO Package8 0.67 (Note 1,6)
-
0.67 (Note 1,6)
-
TSSOP8
0.62 (Note 2,6)
-
0.62 (Note 2,6)
-
Power Dissipation
Pd Mini SO8
0.58 (Note 3,6)
-
0.58 (Note 3,6)
-
W
SO Package14
-
1.02 (Note 4,6)
-
1.02 (Note 4,6)
Mini SO8
-
0.84 (Note 5,6)
-
0.84 (Note 5,6)
Differential Input Voltage (Note 7) Input Common-mode Voltage Range Input Current (Note 8)
Operating Supply Voltage
Operating Temperature Range
VID VICM
II VOPR TOPR
36
V
(Vcc--0.3) to (Vcc-+36)
V
-10
mA
+3.0 to +36.0 (±1.5 to ±18.0)
V
-40 to +85
-40 to +125
°C
Storage Temperature Range
TSTG
-55 to +150
°C
Maximum Junction Temperature
TJMAX
+150
°C
Note: Absolute maximum rating item indicates the condition which must not be exceeded. Application if voltage in excess of absolute maximum rating
or use out of absolute maximum rated temperature environment may cause deterioration of characteristics.
(Note 1) To use at temperature above TA=25°C reduce 5.4mW. (Note 2) To use at temperature above TA=25°C reduce 5.0mW (Note 3) To use at temperature above TA=25°C reduce 4.7mW. (Note 4) To use at temperature above TA=25°C reduce 8.2mW. (Note 5) To use at temperature above TA=25°C reduce 6.8mW (Note 6) Mounted on a FR4 glass epoxy PCB 70mm×70mm×1.6mm(Copper foil area less than 3%).
(Note 7) The voltage differen.