GaAs Matched SP4T Switch
GaAs Matched SP4T Switch 0.02-2 GHz
Features
• Internal CMOS Decoder/Driver • Low Power Consumption • Fast Switching Spe...
Description
GaAs Matched SP4T Switch 0.02-2 GHz
Features
Internal CMOS Decoder/Driver Low Power Consumption Fast Switching Speed, 60 ns Typ Very High Intercept Points
SW-369
0.625 ± 0.020 (15.88 ± 0.5)
FP-26
.015 ± .003 x .010 ± .003 Thk. 20 Places (0.38 ± 0.08 x 0.25 ± 0.08)
(From -55°C to +85°C) 0.02 – 2.0 GHz 2.8 dB Max 2.4 dB Max 1.8 dB Max Common, RF1 – RF4 On 2.0:1 Max 1.6:1 Max 1.5:1 Max 1.5:1 Max 1.4:1 Max RF1 - RF4 Off 2.0:1 Max 1.6:1 Max 1.5:1 Max 1.7:1 Max Not Specified 40 dB Min 45 dB Min 50 dB Min
Guaranteed Specifications1
Frequency Range Insertion Loss 0.02 – 2.0 GHz 0.02 – 1.0 GHz 0.02 – 0.5 GHz
RF1 RF RF4 0.625 ± 0.020 (15.88 ± 0.5) RF2 RF3 0.270 (6.86) Min Typ. 0.450 (11.43) REF
Pin #1
VSWR 0.2 – 2.0 GHz 0.2 – 1.0 GHz 0.2 – 0.5 GHz 0.1 – 0.2 GHz 0.02 – 0.1 GHz Isolation 0.02 – 2.0 GHz 0.02 – 1.0 GHz 0.02 – 0.5 GHz
PIN #11 0.050 TYP (1.27) 0.088 (2.24)
0.150 (3.81) Max
0.070 (1.78) Bottom of case is AC ground. Dimensions in ( ) are in mm. Unless Otherwise Noted: .xxx = ± 0.010 (.xx = ± 0.25) .xx = ± 0.02 (.x = ± 0.5)
Operating Characteristics
Impedance Switching Characteristics Trise,Tfall (10% to 90% RF) Ton, Toff (50% CTL to 90/10% RF) Transients (in band) Input Power for 1 dB Compression 0.5 – 2.0 GHz 0.05 GHz 50 Ohms Nominal 8 ns Typ 60 ns Typ 50 mV Typ +23 dBm Typ +17 dBm Typ
Intermodulation Intercept Point (for two-tone input power up to +5 dBm) Intercept Points IP2 IP3 0.5 – 2.0 GHz +72 +44 dBm Typ 0.05 GHz +50 +40 dBm Typ Bias Power +5 VDC @ 2 ...
Similar Datasheet