LIS2L06AL INERTIAL SENSOR Datasheet

LIS2L06AL Datasheet, PDF, Equivalent


Part Number

LIS2L06AL

Description

MEMS INERTIAL SENSOR

Manufacture

STMicroelectronics

Total Page 17 Pages
Datasheet
Download LIS2L06AL Datasheet


LIS2L06AL
LIS2L06AL
MEMS INERTIAL SENSOR:
2-axis - +/- 2g/6g ULTRACOMPACT LINEAR ACCELEROMETER
Features
2.4V TO 5.25V SINGLE SUPPLY
OPERATION
LOW POWER CONSUMPTION
±2g/±6g USER SELECTABLE FULL-SCALE
0.3mg RESOLUTION OVER 100Hz
BANDWIDTH
EMBEDDED SELF TEST
OUTPUT VOLTAGE, OFFSET AND
SENSITIVITY RATIOMETRIC TO THE
SUPPLY VOLTAGE
HIGH SHOCK SURVIVABILITY
ECO-PACK COMPLIANT
www.DataSheet4U.com
Description
The LIS2L06AL is a low-power 2-axis linear
capacitive accelerometer that includes a sensing
element and an IC interface able to take the
information from the sensing element and to
provide an analog signal to the external world.
The sensing element, capable of detecting the
acceleration, is manufactured using a dedicated
process developed by ST to produce inertial
sensors and actuators in silicon.
The IC interface is manufactured using a standard
CMOS process that allows high level of integration
Order codes
Part number
LIS2L06AL
LIS2L06ALTR
Temp range, °C
-40°C to +85°C
-40°C to +85°C
LGA-8
to design a dedicated circuit which is trimmed to
better match the sensing element characteristics.
The LIS2L06AL has a dynamically selectable full
scale of ±2g/±6g and it is capable of measuring
accelerations over a bandwidth of 2.0 kHz for all
axes. The device bandwidth may be reduced by
using external capacitances. A self-test capability
allows to check the mechanical and electrical
signal path of the sensor.
The LIS2L06AL is available in plastic SMD
package and it is guaranteed to operate over an
extended temperature range of -40°C to +85°C.
The LIS2L06AL belongs to a family of products
suitable for a variety of applications:
– Mobile terminals
– Gaming and Virtual Reality input devices
– Free-fall detection for data protection
– Antitheft systems and Inertial Navigation
– Appliance and Robotics.
Package
LGA-8
LGA-8
Packing
Tray
Tape & Reel
September 2005
CD00068417
Rev 1
1/17
www.st.com
17

LIS2L06AL
Contents
LIS2L06AL
1 Block Diagram & Pins Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Pin Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Mechanical and Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Mechanical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.3 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.4 Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3 Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.1 Sensing element . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.2 IC Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.3 Factory calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4 Application hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.1 Soldering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.2 Output Response vs Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5 Typical performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.1 Mechanical Characteristics at 25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.2 Mechanical Characteristics derived from measurement in the
-40°C to +85°C temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5.3 Electrical characteristics at 25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6 Package Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/17 CD00068417


Features LIS2L06AL MEMS INERTIAL SENSOR: 2-axis - +/- 2g/6g ULTRACOMPACT LINEAR ACCELERO METER Features ■ ■ ■ ■ ■ ■ 2.4V TO 5.25V SINGLE SUPPLY OPERATION LOW POWER CONSUMPTION ±2g/±6g USER SE LECTABLE FULL-SCALE 0.3mg RESOLUTION O VER 100Hz BANDWIDTH EMBEDDED SELF TEST OUTPUT VOLTAGE, OFFSET AND SENSITIVITY RATIOMETRIC TO THE SUPPLY VOLTAGE HIGH SHOCK SURVIVABILITY ECO-PACK COMPLIANT LGA-8 to design a dedicated circuit w hich is trimmed to better match the sen sing element characteristics. The LIS2L 06AL has a dynamically selectable full scale of ±2g/±6g and it is capable of measuring accelerations over a bandwid th of 2.0 kHz for all axes. The device bandwidth may be reduced by using exter nal capacitances. A self-test capabilit y allows to check the mechanical and el ectrical signal path of the sensor. The LIS2L06AL is available in plastic SMD package and it is guaranteed to operate over an extended temperature range of -40°C to +85°C. The LIS2L06AL belongs to a family of products suitable for a va.
Keywords LIS2L06AL, datasheet, pdf, STMicroelectronics, MEMS, INERTIAL, SENSOR, IS2L06AL, S2L06AL, 2L06AL, LIS2L06A, LIS2L06, LIS2L0, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)