SDXL005

SDXL005, SDXL010 Compensated Pressure Sensors in a DIP Package FEATURES · 0 - 5 and 0 - 10 In. H2O · Low Cost Dip · Temperature Compensated · Calibrated Zero and Span · Small Size · Low Noise · High Impedance for Low Power Applications GENERAL DESCRIPTION The SDXL series sensors will provide a very cost effective solution for pressure applications that require small size plus performance. These calibrated and temperature compensated sensors give an accurate and stable output over a 0°C to 50°C temperature range. This series is intended for use with non-corrosive, nonionic working fluids such as air, dry gases and the like. The SDXL devices are specifically designed to measure low pressures. They feature a 0 to 5 and 0 to 10 In. H2O full scale range. The output of the bridge is ratiometric to the supply voltage and operation from any D.C. supply voltage up to +20 V is acceptable. The SDXL devices feature an integrated circuit sensor element and laser trimmed thick film ceramic housed in a compact solvent resistant case. The package is a double wide (i.e., 0.600" lead spacing) dual-inlinepackage. This is the same familiar package used by IC manufacturers except that is has a pressure port(s). The PC board area used by each DIP is approximately 0.26 square inches. This extremely small size enables the use of multiple sensors in limited available space. The DIP provides excellent corrosion resistance and isolation to external package stress. The DIP mounts on a PC board like a ...