CHV2711-QJ Power Amplifier Datasheet

CHV2711-QJ Datasheet, PDF, Equivalent


Part Number

CHV2711-QJ

Description

3.5 GHz InGaP HBT 5W Linear Power Amplifier

Manufacture

Mimix Broadband

Total Page 6 Pages
Datasheet
Download CHV2711-QJ Datasheet


CHV2711-QJ
3.5 GHz InGaP HBT
5W Linear Power Amplifier
October 2006 - Rev 26-Oct-06
Features
Internal Pre-matching
Single Supply operation
Power Gain 8 dB
ESD Protection on board
Current Control for multiple applications
2.5% EVM @ 26.5 dBm avg power, 802.16 OFDM
signal format, PAR = 9 dB
Plastic Surface mount packaging
Low Thermal Resistance
Ideal for WiMAX applications
Lead Free and RoHS compliant 6x6 QFN package
CHV2711-QJ
General Description
The CHV2711 internally pre-matched power HBT device
provides 8 dB of gain, 2.5% EVM at 26.5 dBm output power for
802.16 OFDM signal with a peak to average power ratio of 9
dB.The device operates off a single supply voltage up to 12V
and includes internal bias circuitry to enable exact setting of
the quiescent current using an external Vcontrol.This Vcontrol
is non-unique voltage setting and the same value can be used
www.DataSheet4U.com
for each part depending on the required Icq.The device is
ideal for high linearity, high data rate applications such as
WiMAX. Internal pre-matching facilitates a simplified external
matching approach and the highest in-band gain potential of
the device.The device operates with unique matching at each
of the popular WiMAX bands with the inherent repeatability of
an InGaP HBT process.
Absolute Maximum Ratings
Voltage Supply (Vcc)
4.5 (min) / 12 V (max)
Current (Icc)
2000 mA
Dissipated Power (Pdiss)
18W
Input Power (Pin)
Storage Temperature (Tstg)
22 dBm
-60 to +150 ºC
Channel Temperature (Tch)
175 ºC
Thermal Resistance (Rth)
5 ºC/W
Operating Backside Temperature (Tb) -40 ºC to (see note 1)
Operation outside any of these limits can cause permanent damage.
(1) Caclulate maximum operating temperature Tmax using the
following formula: Tmax=175-(Pdiss [W] x 5) [C].
Electrical Characteristics (Ambient Temperature T = 25 oC,Vcc = 12V)1
Parameter
Units Min. Typ. Max.
Operating Frequency (f )
MHz 3.4 3.5 3.6
Quiescent Current (Icq)2
mA - 730 760
Power Gain @ Pout = 26.5 dBm (Gps)
dB - 8 -
Current @ 26.5 dBm (Icc)
mA - 750 780
Output Power @ EVM = 2.5% (Pout)3
dBm 26.5
-
-
Adjacent Channel Power Ratio @ Pout=26.5 dBm (ACPR)4 dBc - -45 -
Input Reflection Coefficient (S11)
dB -10
Noise Figure (NF)
dB 5
1. Data measured in a Mimix matched connectorized fixture.
2. Quiescent current depends on Vcc and measured @ Pout = 30 dBm
3. Using an 802.1 6d OFDM signal format with PAR=9 dB
4. Using 3 GPP WCDMA signal, PAR = 9.17 dB
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 6
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.

CHV2711-QJ
3.5 GHz InGaP HBT
5W Linear Power Amplifier
October 2006 - Rev 26-Oct-06
CHV2711-QJ
Typical Performance: (802.16 OFDM signal, PAR = 9 dB, Vcc = 12V, Vcontrol = 8V, Icc = 736mA)
11.00
CHV2711-QJ-0G00
S21
9.00
7.00
5.00
3.00
1.00
-1.00
-3.00
-5.00
-7.00
-9.00
-11.00
-13.00
-15.00
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
Frequency (GHz)
CHV2711-QJ-0G00
0.00 S11 and S22
-5.00
-10.00
-15.00
-20.00
S11 S22
-25.00
-30.00
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
Frequency (GHz)
10
9
8
7
6
5
4
3
2
1
0
18
CHV2711-QJ-0G00
Gain Vs Pout Vs Frequency
20 22 24 26
Pout (dBm)
3.4 GHz
3.5 GHz
3.6 GHz
28
-40.00
CHV2711-QJ-0G00
ACPR Vs Pout Vs Frequency
-42.00
-44.00
-46.00
-48.00
-50.00
-52.00
-54.00
3.4 GHz
-56.00
3.5 GHz
-58.00
3.6 GHz
-60.00
30 18 19 20 21 22 23 24 25 26 27 28 29 30
Pout (dBm)
CHV2711-QJ-0G00
Current Vs Pout Vs Frequency
1000
3.4 GHz
900 3.5 GHz
3.6 GHz
800
700
600
500
18 19 20 21 22 23 24 25 26 27 28 29 30
Pout (dBm)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 6
Characteristic Data and Specifications are subject to change without notice. ©2006 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.


Features 3.5 GHz InGaP HBT 5W Linear Power Amplif ier October 2006 - Rev 26-Oct-06 Featu res Internal Pre-matching Single Supply operation Power Gain 8 dB ESD Protecti on on board Current Control for multipl e applications 2.5% EVM @ 26.5 dBm avg power, 802.16 OFDM signal format, PAR = 9 dB Plastic Surface mount packaging L ow Thermal Resistance Ideal for WiMAX a pplications Lead Free and RoHS complian t 6x6 QFN package CHV2711-QJ The CHV2 711 internally pre-matched power HBT de vice provides 8 dB of gain, 2.5% EVM at 26.5 dBm output power for 802.16 OFDM signal with a peak to average power rat io of 9 dB. The device operates off a s ingle supply voltage up to 12V and incl udes internal bias circuitry to enable exact setting of the quiescent current using an external Vcontrol. This Vcontr ol is non-unique voltage setting and th e same value can be used www.DataSheet4 U.com for each part depending on the re quired Icq. The device is ideal for hig h linearity, high data rate applications such as WiMAX. Interna.
Keywords CHV2711-QJ, datasheet, pdf, Mimix Broadband, 3.5, GHz, InGaP, HBT, 5W, Linear, Power, Amplifier, HV2711-QJ, V2711-QJ, 2711-QJ, CHV2711-Q, CHV2711-, CHV2711, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)