CATV Amplifier. MAAMSS0041 Datasheet


MAAMSS0041 Amplifier. Datasheet pdf. Equivalent


Part Number

MAAMSS0041

Description

Broadband CATV Amplifier

Manufacture

Tyco Electronics

Total Page 4 Pages
Datasheet
Download MAAMSS0041 Datasheet


MAAMSS0041
Broadband CATV Amplifier
50 - 1000 MHz
Features
75 Ohm Input / Output Match
CTB: -80 dBc
Noise Figure: 2.7 dB
Gain: 14.8 dB
Lead Free SOT-89 Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
RoHS Compliant and 260°C Re-flow Compatible
Lead Free Version of MAAMSS0031
Description
M/A-COM’s MAAMSS0041 CATV amplifier is a
GaAs MMIC which exhibits low distortion in a
lead-free surface mount plastic package. The
MAAMSS0041 employs a monolithic single stage
design featuring a convenient 75 ohm input/output
impedance that minimizes the number of external
components required.
The MAAMSS0041 provides low noise and high
linearity. It is ideally suited for set top boxes, home
gateways,www.DataSheet4U.com and other broadband internet based
appliances.
The MAAMSS0041 is fabricated using M/A-COM’s
PHEMT process to realize low noise and low
distortion. The process features full passivation for
robust performance and reliability.
Ordering Information1
Part Number
MAAMSS0041
MAAMSS0041TR-3000
MAAMSS0041SMB
Package
Lead Free SOT-89 Plastic
Package
3000 Piece Tape and Reel
Sample Test Board
(Includes 5 Samples)
1. Reference Application Note M513 for reel size information.
RoHS
Compliant
Functional Schematic
MAAMSS0041
V2
Pin 1
Pin Configuration
Pin No.
1
2
3
Pin Name
RFIN
GND
RFOUT
Description
RF Input
Ground
RF Output / Drain Supply
Absolute Maximum Ratings 2,3
Parameter
RF Input Power
Voltage
Operating Temperature
Storage Temperature
Absolute Maximum
15 dBm
10.0 volts
-40°C to +85°C
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice.
M/A-COM makes no warranty, representation or guarantee regarding the
suitability of its products for any particular purpose, nor does
M/A-COM assume any liability whatsoever arising out of the use.
or application of any product(s) or information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.

MAAMSS0041
Broadband CATV Amplifier
50 - 1000 MHz
RoHS
Compliant
MAAMSS0041
V2
Electrical Specifications: TA = 25°C, Freq: 50 - 1000 MHz, VDD = +8 Volts, Z0 = 75 Ohms
Parameter
Gain
Gain Flatness
Noise Figure
Input Return Loss
Output Return Loss
Output IP3
Composite Triple Beat, CTB
Composite Second Order, CSO
P1dB
IDD
Test Conditions
6 MHz Spacing, -10 dBm output per tone
132 channels, +23 dBmV/channel at the output.
132 channels, +23 dBmV/channel at the output.
+ 8 Volts
Units
dB
dB
dB
dB
dB
dBm
dBc
dBc
dBm
mA
Min.
14.0
Typ.
14.8
0.5
2.7
20
18
36
-80
-70
23
100
Schematic Including Off-Chip
Components
Recommended Board Layout
Max.
16.0
1.0
3.8
130
Off-Chip Component Values
Component
C1
C2
C3
C4
C5
L1 4
L2
L3
R1
Value
0.01 µF
0.01 µF
0.01 µF
0.01 µF
0.5 pF
1000 nH
8.2 nH
5.6 nH
523
Package
0402
0402
0402
0402
0402
1210
0402
0402
0402
4. L1 supplied from EPCOS, part number B82422A1102K100.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice.
M/A-COM makes no warranty, representation or guarantee regarding the
suitability of its products for any particular purpose, nor does
M/A-COM assume any liability whatsoever arising out of the use.
or application of any product(s) or information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.


Features RoHS Compliant Broadband CATV Amplifier 50 - 1000 MHz Features • • • • • • • • • 75 Ohm Input / Outp ut Match CTB: -80 dBc Noise Figure: 2.7 dB Gain: 14.8 dB Lead Free SOT-89 Pack age 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Compound RoHS Compliant and 260°C Re-flow Compa tible Lead Free Version of MAAMSS0031 MAAMSS0041 V2 Functional Schematic Des cription M/A-COM’s MAAMSS0041 CATV am plifier is a GaAs MMIC which exhibits l ow distortion in a lead-free surface mo unt plastic package. The MAAMSS0041 emp loys a monolithic single stage design f eaturing a convenient 75 ohm input/outp ut impedance that minimizes the number of external components required. The MA AMSS0041 provides low noise and high li nearity. It is ideally suited for set t op boxes, home and other broadband inte rnet based www.DataSheet4U.com gateways , appliances. The MAAMSS0041 is fabrica ted using M/A-COM’s PHEMT process to realize low noise and low distortion. The process features full passivation for robust per.
Keywords MAAMSS0041, datasheet, pdf, Tyco Electronics, Broadband, CATV, Amplifier, AAMSS0041, AMSS0041, MSS0041, MAAMSS004, MAAMSS00, MAAMSS0, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)