MAAMSS0067 CATV Amplifier Datasheet

MAAMSS0067 Datasheet, PDF, Equivalent


Part Number

MAAMSS0067

Description

Low Noise CATV Amplifier

Manufacture

Tyco Electronics

Total Page 4 Pages
Datasheet
Download MAAMSS0067 Datasheet


MAAMSS0067
Low Noise CATV Amplifier
50 - 1000 MHz
Features
Low Distortion
Low Noise Figure
Push Pull Design
Single Positive Supply
Lead-Free 4 mm 20-Lead PQFN Package
100% Matte Tin Plating over Copper
Halogen-Free “Green” Mold Compound
260°C Reflow Compatible
RoHS* Compliant Version of MAAMSS0003
Description
M/A-COM’s MAAMSS0067 is a GaAs PHEMT MMIC
amplifier in a lead-free 4 mm 20-lead PQFN
package. The MMIC design is configured as a pair
of cascode PHEMT amplifiers for broadband
performance. It is designed for integration in a
75-ohm push-pull, low distortion, amplifier circuit.
The device is ideally suited for use in CATV, DBS,
and HDTV applications where low noise figure and
low distortion are required.
www.DataSheet4U.com
Ordering Information 1
Part Number
MAAMSS0067
MAAMSS0067TR-3000
MAAMSS0067SMB
Package
Bulk Packaging
3000 piece reel
Sample Test Board
(Includes 5 Samples)
1. Reference Application Note M513 for reel size information.
Absolute Maximum Ratings 2,3
Parameter
Absolute Maximum
Input Power
+20 dBm
Operating Voltage
+10 volts
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
2. Exceeding any one or combination of these limits may cause
permanent damage to this device.
3. M/A-COM does not recommend sustained operation near
these survivability limits.
RoHS
Compliant
MAAMSS0067
V2
Functional Schematic
N/C
RO1 N/C N/C N/C RO2
text text text text text
N/C
N/C N/C
FB1 FB2
N/C N/C
N/C N/C
text text text text text
RI1 N/C N/C N/C RI2
Pin Configuration 4
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Pin Name
N/C
N/C
FB1
N/C
N/C
RI1
N/C
N/C
N/C
RI2
N/C
N/C
FB2
N/C
N/C
RO2
N/C
N/C
N/C
RO1
Description
No Connection
No Connection
Feedback 1
No Connection
No Connection
RF Input 1
No Connection
No Connection
No Connection
RF Input 2
No Connection
No Connection
Feedback 2
No Connection
No Connection
RF Output 2
No Connection
No Connection
No Connection
RF Output 1
4. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.

MAAMSS0067
Low Noise CATV Amplifier
50 - 1000 MHz
RoHS
Compliant
MAAMSS0067
V2
Electrical Specifications: TA = 25°C, Freq: 50 - 1000 MHz, VDD = +5 Volts, Z0 = 75 ohms
Test Circuit with M/A-COM Balun ETN1-1-13
Parameter
Gain
Test Conditions
Units
dB
Min.
11.5
Typ.
12.2
Max.
13.0
Gain Flatness
— dB — 0.4 1.0
Noise Figure
— dB — 3.3 4.0
Input VSWR
Ratio — 1.3:1
Output VSWR
Ratio — 1.5:1
Output IP3
Two tones at 397 & 403 MHz, +4 dBm output per tone dBm
32
Composite Triple Beat, CTB 135 Channels, +13 dBmV/Channel at the input dBc — -78 -70
Composite Second Order, CSO
135 Channels, +13 dBmV/Channel at the input
dBc —
-78
-70
Cross modulation
135 Channels, +13 dBmV/Channel at the input dBc — -73 -64
P1dB
400 MHz
dBm
24
IDD
+5 Volts
mA — 190 225
Test Circuit Schematic5
Recommended Test Circuit Layout6
C3 R1
RF IN
T1
C1
C2
C5
+5V
L1
C7
C9
T2
C10
C8
RF
OUT
C4 R2
L2
+5V
C6
5. The 1:1 baluns, T1 & T2, are M/A-COM part number
ETN1-1-13.
External Circuitry Parts List
Qty
8
2
2
2
2
Description
Capacitor, 0.01 uF, 0603, SMT, 10% (C1-C8)
Capacitor, 2 pF, 0402, SMT, ± 0.25pF (C9-C10)
Inductor, 390 nH, 1008, SMT, 10% (L1, L2)
Balun, 1:1, M/A-COM, ETN1-1-13, SMT (T1,T2)
Resistor, 0 ohms, 0603, SMT (R1, R2)
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
6. Reference M/A-COM Application Note S2083 for
recommended PCB configuration. R1 and R2 are 0 ohms.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
North America Tel: 800.366.2266 / Fax: 978.366.2266
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.


Features RoHS Compliant Low Noise CATV Amplifier 50 - 1000 MHz Features • • • • • • • • • Low Distortion Low Noise Figure Push Pull Design Single Po sitive Supply Lead-Free 4 mm 20-Lead PQ FN Package 100% Matte Tin Plating over Copper Halogen-Free “Green” Mold Co mpound 260°C Reflow Compatible RoHS* C ompliant Version of MAAMSS0003 MAAMSS0 067 V2 Functional Schematic RO1 text N /C text N/C text N/C text RO2 text N/C N/C FB1 N/C N/C N/C FB2 N/C N/C te xt text text text text Description M/A -COM’s MAAMSS0067 is a GaAs PHEMT MMI C amplifier in a lead-free 4 mm 20-lead PQFN package. The MMIC design is confi gured as a pair of cascode PHEMT amplif iers for broadband performance. It is d esigned for integration in a 75-ohm pus h-pull, low distortion, amplifier circu it. The device is ideally suited for us e in CATV, DBS, and HDTV applications w here low noise figure and low distortio n are required. www.DataSheet4U.com N/ C RI1 N/C N/C N/C RI2 Pin Configuration 4 Pin No. 1 2 Pin Name N/C N/C FB1 N/C N/.
Keywords MAAMSS0067, datasheet, pdf, Tyco Electronics, Low, Noise, CATV, Amplifier, AAMSS0067, AMSS0067, MSS0067, MAAMSS006, MAAMSS00, MAAMSS0, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)