Cascadable Amplifier 10 to 1500 MHz
Features
• HIGH OUTPUT LEVEL: +15.5 dBm (TYP.) • HIGH THIRD ORDER IP: +28 dBm (TYP.)...
Cascadable Amplifier 10 to 1500 MHz
Features
HIGH OUTPUT LEVEL: +15.5 dBm (TYP.) HIGH THIRD ORDER IP: +28 dBm (TYP.) WIDE POWER SUPPLY RANGE: +5 TO +15 VOLTS
A27/ SMA27
V2
Product Image
Description
The A27 RF amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This single stage bipolar
transistor feedback amplifier design displays impressive performance over a broadband frequency range. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screening is available.
Ordering Information
Part Number
A27 SMA27
www.DataSheet4U.com
Package
TO-8 Surface Mount SMA Connectorized
CA27
Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC
Typical Parameter
Frequency Small Signal Gain (min) Gain Flatness (max) Reverse Isolation Noise Figure (max) Power Output @ 1 dB comp. (min) IP3 IP2 Second Order Harmonic IP VSWR Input / Output (max) DC Current @ 15 Volts (max) mA
Absolute Maximum Ratings
Parameter
Storage Temperature Case Temperature DC Voltage Continuous Input Power
Guaranteed 0º to 50ºC
10-1500 7.5 ±0.6
Units 25ºC
MHz dB dB dB dB dBm dBm dBm dBm 5-1600 8.5 ±0.2 15 7.5 15.5 +28 +46 +50 1.5:1 / 1.5:1 50 1.9:1 / 1.9:1 54 2.0:1 / 2.0:1 57 9.0 14.0 9.5 13.5
Absolute Maximum
-62ºC to +125ºC +125ºC +17 V +13 dBm 50 mW 0.5 W +125ºC
-54º to +85ºC*
10-1500 7.0 ±1.0
Short Term Input power (1 minute max.) Peak Power (3 µsec max.) “S” Series Burn-In Temperature (cas...