(MC9S08GT8A / MC9S08GT16A) Microcontrollers
MC9S08GT16A MC9S08GT8A
Data Sheet
www.DataSheet4U.com
HCS08 Microcontrollers
MC9S08GT16A Rev. 1 7/2006
freescale.com...
Description
MC9S08GT16A MC9S08GT8A
Data Sheet
www.DataSheet4U.com
HCS08 Microcontrollers
MC9S08GT16A Rev. 1 7/2006
freescale.com
MC9S08GT16A/GT8A Features
8-Bit HCS08 Central Processor Unit (CPU)
40-MHz HCS08 CPU HC08 instruction set with added BGND instruction Support for up to 32 interrupt/reset sources Software selectable pullups on ports when used as input Internal pullup on RESET and IRQ pin to reduce customer system cost Up to 38 general-purpose input/output (I/O) pins, plus one output-only pin, depending on package selection
Memory Options
FLASH read/program/erase down to 1.8 V Up to 16K FLASH; up to 2K RAM
Development Support
Background debugging system Breakpoint capability to allow single breakpoint setting during in-circuit debugging (plus two more breakpoints in on-chip debug module) On-chip, in-circuit emulation (ICE) debug module with real-time bus capture. On-chip ICE debug module containing two comparators and nine trigger modes. Eight deep FIFO for storing change-of-flow addresses and event-only data. Single-wire background debug interface
Power-Saving Modes
Three very low power stop modes Reduced power wait mode Very low power real time interrupt for use in run, wait, and stop
Clock Source Options
Clock sources to internal hardware frequency locked-loop (FLL): internal, external, crystal, or resonator Internal clock with ±0.2% trimming resolution and ±0.5% deviation across voltage or across temperature
Package Options
48...
Similar Datasheet